Friction and wear behavior of single-phase high-entropy alloy FeCoNiCrMn under MoS₂-oil lubrication

Abstract

Purpose The face-centered cubic structured single-phase FeCoNiCrMn high-entropy alloys (HEAs) were prepared to study the friction and wear behavior of HEAs under MoS2-oil lubrication. Design/methodology/approach FeCoNiCrMn alloys were subjected to ball-on-disc reciprocating sliding against the GCr15 ball. L25(56) orthogonal wear tests were designed for velocity Vrel (4.167-20.833 mm/s), load FN (10-50 N), temperature T (RT-140 °C) and time t (5-20 min). Based on orthogonal test results, multivariate repeated measures ANOVA was performed, and further comparative experiments were conducted for Vrel, FN and T. Energy dispersive spectrometer and scanning electron microscope were applied to characterize the surface morphology of wear scar and its element distribution. Findings Vrel, FN and t exerted the most significant influence (p < 0.01) on the average friction coefficient f. Vrel and FN were identified as the momentous effect (p < 0.01) on wear volume ΔV. T (≥50 °C) had positive correlation with f and ΔV, and both Vrel and FN correlated negatively with f. The dominant abrasive wear was attributed to the large hardness difference of the friction pair. Fatigue wear and delamination wear were experienced at higher speeds (Vrel ≥ 12.5 mm/s) and loading levels (FN ≥ 40 N). Elevated temperature weakens the lubrication effect of MoS2-oil and the mechanical properties of FeCoNiCrMn matrix, intensifying abrasive wear. Originality/value This study is expected to provide references for exploration on the wear behavior of single-phase HEAs under complex working conditions with lubrication and hence will help develop the application of HEAs in practical engineering. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0303

Cavitation erosion resistance of high-entropy FeCoCrNiMoXB0.2 coatings cladded by laser

“…High-entropy alloy is a kind of engineering material that has great potentials for energy sectors, aerospace, pipework, and nuclear construction [13][14][15]. Especially, boron-doped high-entropy alloys have high hardness and excellent wear resistance [16][17][18].…”