Frequency Shifts of Micro and Nano Cantilever Beam Resonators Due to Added Masses

Abstract

We present analytical and numerical techniques to accurately calculate the shifts in the natural frequencies of electrically actuated micro and nano (carbon nanotubes (CNTs)) cantilever beams implemented as resonant sensors for mass detection of biological entities, particularly Escherichia coli (E. coli) and prostate specific antigen (PSA) cells. The beams are modeled as Euler–Bernoulli beams, including the nonlinear electrostatic forces and the added biological cells, which are modeled as discrete point masses. The frequency shifts due to the added masses of the cells are calculated for the fundamental and higher-order modes of vibrations. Analytical expressions of the natural frequency shifts under a direct current (DC) voltage and an added mass have been developed using perturbation techniques and the Galerkin approximation. Numerical techniques are also used to calculate the frequency shifts and compared with the analytical technique. We found that a hybrid approach that relies on the analytical perturbation expression and the Galerkin procedure for calculating accurately the static behavior presents the most computationally efficient approach. We found that using higher-order modes of vibration of micro-electro-mechanical-system (MEMS) beams or miniaturizing the sizes of the beams to nanoscale leads to significant improved frequency shifts, and thus increased sensitivities.

Mass sensor using mode localization in two weakly coupled MEMS cantilevers with different lengths: Design and experimental model validation

“…Therefore, the equilibrium position of the microbeam is shifted and it vibrates around a new static deflection which depends on the DC voltage. By using one mode Galerkin discretization, the total deflection of each cantilever can be expressed by [35]…”

“…Firstly, the static deflection is calculated by dropping all time varying terms [35] in Eq. (15) and Eq.…”

Nonlinear Analytical Model of Two Weakly Coupled MEMS Cantilevers for Mass Sensing Using Electrostatic Actuation

“…The first and second equation in (3) are then multiplied respectively by φ1(x) and φ2(x) and they are respectively integrated from x = 0 to x = 1 and from x = 0 to x = L2/L1. In the resulting equation, all time varying terms are first dropped to determine the static deflection [5]. After this consideration, we obtain finally the following system of equations…”

Theoretical modeling of tunable vibrations of three-dimensional serpentine structures for simultaneous measurement of adherent cell mass and modulus

“…Vibrational structures with submillimeter dimensions have been widely adopted in determining the physical properties of materials such as cells, [1][2][3][4][5][6][7][8][9][10][11][12] blood, 13,14 and nanofibers/nanowires. [15][16][17][18] Vibration-based methods in cell mechanics is of growing interest because of their rapid and non-invasive ability to monitor cellular processes in real time.…”