Formula Synthesis of Maximal Mechanical Torque on Volume for Cylindrical Magnetic Coupler

Abstract

In this paper the influence of basic design parameters (proportionality coefficient β and permanent magnets height h) on the mechanical torque for cylindrical magnetic coupler with rounded permanent magnets is researched. Such cylindrical magnetic couplers are often used in pumps and liquid mixers. At the beginning the design parameters and their relevance are explained. The mechanical torque is calculated applying the software QuickField. In the data analysis and for the coupler comparison the division of maximal mechanical torque on volume is taken as the main characteristic. Because of the planned optimization for the calculated variants there were synthesized few formulas, from which the most suitable were found (for all researched design parameters’ ranges). The formulas are synthesized using a program, which is created by Oskars Onzevs. The program for the formula synthesis is based on regression models, and the basic principles of it are explained. All the calculations for experimental and formula data are made for magnetic coupler’s design with one pole pair number p that is equal to three.

Methods to reduce cogging torque of permanent magnet synchronous generator used in wind power plants

“…The multivariate data analysis method -regression models -will be used to synthesize mathematical models for the forecasting of the cogging torque values as it was done for the magnetic coupler [39] and synchronous reluctance motor [40].…”

Optimization of Disk Magnetic Coupler Based on Orthogonal Test and Multiobjective Genetic Algorithm

“…Due to the good characteristics and many applications of permanent magnet couplers, more and more scholars have carried out theoretical research on them, making the permanent magnet couplers have breakthroughs in efciency and manufacturing [6]. Ose-Zala et al [7] and Aman et al [8] studied the infuence of geometric parameter design on the performance of the magnetic coupler. Zhenjun et al [9] proposed the single-factor test of the magnet drive coupling based on the fnite element method to study the infuence of single-factor change on the magnetic performance, and then optimized the design of the magnet drive coupling by the orthogonal test.…”