Flexible organic field-effect transistors fabricated by the electrode-peeling transfer with an assist of self-assembled monolayer

Abstract

Articles you may be interested in Manipulation of graphene work function using a self-assembled monolayer J. Appl. Phys. 116, 084312 (2014); 10.1063/1.4894392 Poly(methyl methacrylate) as a self-assembled gate dielectric for graphene field-effect transistors Appl. Phys. Lett. 104, 083106 (2014); 10.1063/1.4866338 Phosphonic acid self-assembled monolayer and amorphous hafnium oxide hybrid dielectric for high performance polymer thin film transistors on plastic substrates Appl. Phys. Lett. 95, 113305 (2009); 10.1063/1.3231445 Flexible organic field-effect transistors fabricated by the electrode-peeling transfer with an assist of self-assembled monolayer

Plastic electronic devices: From materials design to device applications

“…Source-drain contacts can be patterned on a donor material and then transferred either by direct lamination [8,9] or by attachment to an adhesive vehicle that is then applied to the device [27]. A patterned adhesive stamp can be "inked" to partially remove an unpatterned semiconductor from a substrate, leaving behind an array of isolated channel regions of multiple organic devices [100].…”

Direct Patterning of Organic‐Thin‐Film‐Transistor Arrays via a “Dry‐Taping” Approach

“…[25,26] In this communication, a simple yet efficient method for patterning small-molecule OTFT arrays through a ''dry-taping'' approach using Scotch tape is presented. In this method, Scotch tape is gently pressed onto the surface of an organic thin film that has been previously deposited on a substrate bearing a patterned Au film.…”

Micro-scale metallization of high aspect-ratio Cu and Au lines on flexible polyimide substrate by electroplating using SU-8 photoresist mask

“…There have been extensive research activities on flexible electronics based on polymeric materials . Flexible TFT (thin film transistor) [1][2][3][4][5][6][7][8][9][10][11], flexible flat panel displays including organic light emitting diodes (OLED) [12,13] and liquid-crystal displays (LCD) [14], sensors [15][16][17], microelectromechanical systems (MEMS) [18], photovoltaic devices [19,20] and FPCB (flexible printed circuit board) [21] based on all polymeric materials or partial employment of polymeric materials have been developed due to low-cost and ease of fabrication. It is expected that flexible microelectromechanical (MEMS) and semiconductor devices as well as flexible displays can be fabricated on flexible substrate for many applications in the future.…”

“…doi:10.1016/j.mee.2004.09.007 ufacturing of various flexible and low-cost electronic and display devices [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20]. There have been extensive research activities on flexible electronics based on polymeric materials .…”