Fatigue Life Analysis of Ball Bearings and a Shaft System Considering the Combined Bearing Preload and Angular Misalignment

Abstract

Bearing preload significantly affects the running performance of a shaft-bearing system including the fatigue life, wear, and stiffness. Due to the mounting error, the bearing rings are often angularly misaligned. The effects of the combined bearing preload and angular misalignment on the fatigue life of ball bearings and a shaft-bearing system are analyzed in this paper. The contact force distribution of angular contact ball bearings in the shaft-bearing system is investigated based on the system model. The system model includes the bearing model, and the shaft model is verified by comparing with the manufacturer’s manual and the results from other theoretical models, with the difference between the results from the present bearing model and manufacturer manual within 3%. The global optimization method is used to replace the Newton–Raphson algorithm to solve the ball elements’ displacements and friction coefficients, which improves the computation efficiency of the system model. The fatigue life of each bearing is evaluated with the consideration of the two preload methods and two angular misalignment cases. The fatigue life results show that the system life at the optimal angular misalignment is more than 1.5 times that without angular misalignment at the low preload value, and this ratio decreases as the preload value increases. The optimal angular misalignment of both the shaft-bearing system and the misaligned bearing is not always consistent, which depends on the preload value and bearing life. Both the constant-displacement preload and constant-force preload do not cause a significant difference in the highest system life. The different misaligned bearings can lead to different highest system lives as the preload value is low.

Methods of Condition Monitoring and Fault Detection for Electrical Machines

“…However, increasing a bearing's cleanliness does not always improve its fatigue properties [43]. Cyclic and continuous loads have a remarkable effect on the running performance of the bearing, including material fatigue, wear, and stiffness [44]. These stresses cause micro-cracks in the structure of the bearing.…”

Advances in Machine Fault Diagnosis

“…Last, but not least, the authors of [11] researched problems arising in the bearings and shafts of machines. Bearing preload significantly affects the running performance of a shaft-bearing system including the fatigue life, wear, and stiffness.…”

Drill Bit Deformations in Rotary Drilling Systems under Large-Amplitude Stick-Slip Vibrations

“…During drilling operations, the rotary table and the drive shaft may be subjected to various dysfunctions; as the bottom vibrations reoccur, the bearings at the rotary table may deform, which would then lead to vibrations at the floor. Considering the dynamic loads that the rotary table supports, and the torsional vibrations that propagate to the surface, the service life of the ball bearings could decrease [15].…”