Fabrication of Solid Oxide Fuel Cell Using the Dual Tape Casting Method

Abstract

SOFC single cell was fabricated by using cost effective and simple methods like tape casting and screen printing. Anodic and anodic active layer and electrolyte layer were made by tape casting method. Properties and characterization of the cell was examined. Results showed fabricated cell has good microstructure and its performance that comparable with the other SOFC.

Effect of air addition to methane on performance stability and coking over NiO–YSZ anodes of SOFC

“…Resultant slurry was de-aired by a vacuum pump and casted by a laboratory scale tape casting equipment. Further details are provided in previous work [24]. After drying the anode support layer, anode active layer and electrolyte layer (8YSZ, NexTech Materials) were cast on the anode support and dried for further treatment of the cell.…”