Fabrication and investigation of MnFe2O4/MWCNTs nanocomposite by hydrothermal technique and adsorption of cationic and anionic dyes

Facile fabrication of highly flexible and floatable Cu2O/rGO on Vietnamese traditional paper toward high-performance solar-light-driven photocatalytic degradation of ciprofloxacin antibiotic

“…Thus, the rate of CIP adsorption on this material was directly proportional to the difference between the adsorption capacity at any time t and the adsorption capacity at equilibrium. 25 A similar result was also reported by the previous study. 30 In order to determine the adsorption mechanism of CIP onto Cu 2 O/rGO/VTP, the adsorption isotherm is an important parameter to indicate the distribution of adsorbates between the solid phase and liquid phase when the adsorption reaches an equilibrium state.…”

Superparamagnetic Manganese Ferrite and Strontium Bioactive Glass Nanocomposites: Enhanced Biocompatibility and Antimicrobial Properties for Hyperthermia Application

“…The XRD pattern of these biocomposites before SBF treatment confirms the presence of pure crystalline phase of MnFe 2 O 4 with cubic phase, space group Fd3m matching with the JCPDS card no 74‐2403. [ 32 ] There are no other peaks of crystalline glass phase or glass‐ceramics. New crystalline peaks emerge in the XRD patterns (Figure 2) after SBF treatment for 14 days and demonstrate the development of crystalline apatite layer on the surface of these biocomposites.…”

Green Synthesized Manganese‐Cobaltite Nanospinel and Its Dye Removal Characteristics: Isothermal and Kinetic Studies

“…The best fitted equation for the experimental data could be obtained through comparing the R 2 values reported in Table . The Langmuir constant ( K L ) have been calculated which is a measure of the adsorption heat and the binding affinity . The results are shown in the order of MB > MO (Table ).…”