Fabrication And Characterization of Thermoelectric Generators From SiGe Thin Films

Abstract

Thermoelectric materials are being important due to their application in both thermoelectric power generation and microelectronic cooling. The thermoelectric power generations convert the heat change to electricity. The waste of heat could be useful if the thermoelectric power generation is applied. Effective thermoelectric materials have a low thermal conductivity and a high electrical conductivity. A high thermal conductivity causes too much heat leakage through heat conduction. The performance of the thermoelectric materials and devices is shown by a dimensionless figure of merit, ZT = S 2 σT/K, where S is the Seebeck coefficient, σ is the electrical conductivity, T is the absolute temperature and K is the thermal conductivity. ZT can be increased by increasing S, increasing σ, or decreasing K. In this study, we prepared thermoelectric generator devices of SiGe at the thickness of 112 nm using the ion beam assisted deposition (IBAD) system. Rutherford Backscattering Spectrometry (RBS) analysis was used for the elemental analysis. The 5 MeV Si ion bombardment was performed using the AAMU Pelletron ion beam accelerator to make quantum clusters in the film to decrease the cross plane thermal conductivity, increase the cross plane Seebeck coefficient and electrical conductivity. To characterize the thermoelectric generator devices before and after Si ion bombardment we measured the cross plane Seebeck coefficient, electrical conductivity by Van der Pauw method, and thermal conductivity by 3w method for different fluences.

Energy harvesting: an integrated view of materials, devices and applications

“…Efforts have been made to develop new materials in order to reduce the thermal conductivity more than the electrical conductivity, and to increase the Seebeck coefficient [34][35][36][37]. The properties of such materials have been investigated against the effects of temperature and models have been developed in order to predict their durability and efficiency [38][39][40].…”