Experimental study of the spray characteristics of twin-fluid atomization: Focusing on the annular flow regime

Abstract

The characteristics of twin-fluid atomization operating in the annular flow regime were studied experimentally under various gas-to-liquid ratios (GLRs) and injection pressures. The macroscopic morphology of the spray was obtained by shadowgraph, while the droplet size and velocity were measured using a phase-Doppler particle analyzer. It was found that the spray cone angle increases almost linearly with the GLR, and the axial distance required for droplet coalescence to outweigh the breakup decreases with increasing GLR. The Sauter mean diameter (SMD) first decreases and then increases along the axial direction due to the competition between turbulent breakup and droplet coalescence. The droplet size follows a log-normal distribution; the droplet velocity distribution is closer to a log-normal distribution under large GLRs, while it follows normal distribution with GLR = 3%. Regarding the radial distribution, low GLRs (3% and 5%) lead to a bimodal spatial velocity distribution, while for large GLRs, the droplet velocity decreases monotonically towards the far field. The spray tends to become more stable with increasing GLR and injection pressure Pinj, whereas the SMD increases with increasing Pinj. The underlying atomization mechanism in a twin-fluid injector in the annular flow state can be regarded as the disintegration of the initial liquid sheet by longitudinal Kelvin-Helmholtz instability followed by transverse Rayleigh-Taylor instability, which yields a direct proportionality of the droplet size to the initial liquid sheet thickness ΔL. Subsequently, for high ΔL, the gas core shrinks and ΔL increases, which results in an increased SMD but enhanced atomization efficiency ΔL /SMD.