Experimental Study of the Corona Performance of Aged Sand-Cast Substation Connectors

Abstract

Substation connectors, like many other high-voltage products, are tested once manufactured. However, the corona behavior of aged specimens can differ from that exhibited by newer ones, thus generating detrimental technical and environmental effects. Manufacturers need to know the long-term corona behavior of substation connectors to offer their customers maximum safety and transparency about such critical products. This paper analyzes the ageing effect on the surface roughness and the visual corona extinction voltage of sand-cast aluminum connectors, which were artificially aged in a salt spray chamber for different periods. The experimental results show an important variability of the surface roughness and corona extinction voltage (CEV) among connectors with the same ageing level due to the sand-casting manufacturing process. The results in this paper also show a slight increase in the surface roughness with the ageing period, although there is not a clear pattern between the applied ageing level and the experimental CEV value. It is concluded that the inherent variability among connectors due to the sand-cast process has more influence than the ageing effect itself.

Application of Image Sensors to Detect and Locate Electrical Discharges: A Review

“…Other studies have captured corona using high-speed digital cameras [ 101 , 102 , 103 ]. In [ 88 , 100 , 104 ], unmodified Canon EOS-70D DSLR cameras equipped with 20.2 Mpixels APS-C CMOS sensors have been used to detect and locate the corona sites of high-voltage substation connectors under alternating current supplies, while in [ 105 ] the same camera was used to analyze the corona effect under direct current supply of both polarities.…”