Experimental Investigation of Microcontroller-Based Acoustic Temperature Transducer Systems

Abstract

Temperature transducers are commonly used to monitor process parameters that are controlled by various types of industrial controllers. The purpose of this study is to design and model a simple microcontroller-based acoustic temperature transducer based on the variations of resonance conditions in a cylindrical resonance tube. The transducer’s operation is based on the generation of an acoustic standing wave in the free resonance mode of generation within a cylindrical resonance tube which is converted into a train of pulses using Schmitt trigger circuit. The frequency of the generated standing wave (i.e., the train of pulses) is measured by the Arduino Uno microcontroller, where a digital pin is used to acquire pulses that are counted using a build-in software function in an Arduino IDE environment. Experimental results are performed for three sizes of diameters to investigate the effect of the diameter of resonance tube on the obtained results. The maximum nonlinearity error according to Full-Scale Deflection (FSD) is about 2.3 percent, and the relative error of the transducer is evaluated using experimental findings and the regression model. The circuit simplicity and design of the suggested transducer, as well as the linearity of its measurements, are notable.

Neobots: an open-source platform for a low-cost neonatal incubator with internet of things approach

“…The Arduino Mega has a microcontroller chip that can be programmed. The microcontroller can also be programmed repeatedly, the last installed program will function, and the programming language is based on C [11], [12]. The Arduino Mega board uses a microcontroller of the ATmega2560 type, a flash memory capacity of 256KB, a required input voltage is 7-12V, and 54 I/O pins [13]- [15].…”