Experimental Analyses of the Additive Effect of TiO2 Nanoparticles on the Tribological Properties of Lubricating Oil

Abstract

Titanium dioxide (TiO2) is a promising lubricant additive for enhanced engine efficiency. In this study, pure base engine oil 10 W-30 was improved with titanium dioxide (TiO2) nanoparticles at different concentrations and experimentally evaluated with the scope of tribological behavior improvement. The tribological tests were performed at ambient temperature as well as at 75°C using a four ball tribometer for 30 minutes. Due to their small particle size (approx. 21 nm), the TiO2 nanoparticles were properly dispersed in oil based on optical microscopy evaluation. The tribological results indicate that the friction coefficient of engine oil with 0.075 wt.% TiO2 reached 0.05 at 75°C, which was much lower that of pure oil (1.20), and at room temperature (23°C), it decreased from 1.8 for pure oil to 0.4 for oil with 0.075 wt.% TiO2 due to the formation of a stable tribofilm formed by the MoS2, MoO3, FeS, and FeSO4 composite within the wear track. The lowest wear volume was measured on samples tested at 75°C for the oil with 0.075 wt.% TiO2. The TiO2 additive lubricant effect on the tribofilm properties led to a decrease in friction and wear at an operating temperature of 75°C. The main objective of the paper is to present the recent progress and, consequently, to develop a comprehensive understanding of the tribological behavior of engine oil mixed with TiO2 nanoparticles.