Exergy Optimization of a Solar Collector in Flat Plate Shape Equipped with Elliptical Pipes Filled with Turbulent Nanofluid Flow: A Study for Thermal Management

Abstract

In this paper, forced convection of a multiwalled carbon nanotube (MWCNT)–water nanofluid (NF) in a new flat plate solar collector (FPSC) equipped with elliptical pipes instead of circular ones is investigated. The three-dimensional conservation equations were solved in the domain with the finite volume method (FVM) based on the semi-implicit method for pressure linked equations (SIMPLE) algorithm. The laminar-turbulent range of the Reynolds number (Re) and the volume fraction of the NF (ϕ) were 50–12,000 and 0–0.1, respectively. The optimization process was accomplished through the comparison of diverse parameters to attain the optimal case with the highest exergy efficiency. In this study, it was concluded that, in the case of using elliptical pipes instead of circular tubes, the time that the fluid was inside the FPSC increased, which led to an increase in the outlet temperature, while the exergy efficiency of the FPSC increased. Additionally, it was observed that using elliptical pipes enhanced the outlet fluid temperature, energy efficiency, and exergy efficiency. Generally, while the trend of exergy efficiency variation with effective parameters was rising, applying elliptical pipes caused the efficiency to increase. In addition, the exergy efficiency variation decreased when these parameters were changed. The highest value of exergy efficiency was 7.1%. On the other hand, for each specific FPSC, there was a unique mass flow rate at which the exergy efficiency reached its maximum value, and for higher mass flow rates, the efficiency was slightly diminished and then remained unchanged. Finally, the highest exergy efficiency was achieved for ϕ = 0.10%.

Exergy destruction rate minimization in the absorber of a double effect vapor absorption system

“…Arora and Kaushik [15] stated that energy efficiency and COP are inter-related to absorber temperature as well. Exergy efficiency can be improved by optimizing the operating conditions as performed by Rostami et al [16]. Exergy destruction within the system is due to the irreversibilities of the system [17].…”

Prediction and Optimization of Thermal Conductivity and Viscosity of Stable Plasmonic TiN Nanofluid Using Response Surface Method For Solar Thermal Application

“…His studies suggest that nanomaterials can be employed to improve system efficiency and capture solar energy at a reasonable cost. Rostami et al [16] optimized the energy consumption of a flat plate solar thermal collector. An elliptical-shaped pipe and a water-based multiwall carbon nanotube nanofluid are used in the collector.…”

Analysis of Fluid–Structure Coupling Vibration Mechanism for Subsea Tree Pipeline Combined with Fluent and Ansys Workbench

“…As an important source of energy in our daily life, petroleum directly affects the development of society, economy and industry. As indispensable equipment for the development of offshore oil and gas fields, the subsea tree plays a crucial role in the subsea production system [1][2][3][4][5]. During the process of oil extraction, the subsea tree often vibrates violently.…”