Evaluation of the Impact of the Envelope System on Thermal Energy Demand in Hospital Buildings

Abstract

Construction materials and systems for the thermal building envelope have played a key role in the improvement of energy efficiency in buildings. Urban heat islands together with the upcoming rising global temperature demand construction solutions that are adapted to the specific microclimate conditions. These circumstances are even more dramatic in the case of healthcare buildings where the need to preserve constant indoor temperatures is a priority for the proper recovery of patients. A new neonatal hospital, located in Madrid (Spain), has been monitored, and building energy simulations were performed to evaluate the effect of the building envelope on the energy demand. Based on the simulation results, the design of the building envelope was found to be insufficiently optimised to properly protect the building from the external heat flow. This is supported by the monitored results of the indoor temperatures, which went over the standard limit for about 50% of the hours, achieving up to 27 °C in June and July, and 28 °C in August. The results showed, on one hand, that solar radiation gains transmitted through the façade have an important impact on the indoor temperature in the analysed rooms. Heat gains through the opaque envelope showed an average of 8.37 kWh/day, followed by heat gains through the glazing with an average value of 5.29 kWh/day; while heat gains from lighting and occupancy were 5.21 kWh/day and 4.47 kWh/day, respectively. Moreover, it was shown that a design of the envelope characterised by large glass surfaces and without solar protection systems, resulted in excessive internal thermal loads that the conditioning system was not able to overcome.

Development of Work Breakdown Structure Using Building Information Modeling at Unj

“…In terms of building maintenance costs, buildings that are used routinely together must be carefully planned for maintenance and become a requirement from the planning of the building (Kim et al, 2012;Masood et al, 2017;Mejía et al, 2020). Apart from planning good building maintenance methods, to avoid frequent damage to buildings which lead to increased repair costs, and to maintain the safety and comfort of buildings, the UNJ Campus as an educational campus must involve building users as part of the maintenance of its buildings.…”

Anti-Reflective Zeolite Coating for Implantable Bioelectronic Devices

“…This is evident in industrial technologies characterized by huge energy consumption (e.g., healthcare, automotive, consumer electronics, industrial, etc.) [ 5 , 6 ]. In healthcare modern diagnostic approaches and therapies, implantable bioelectronic devices can improve the clinical outcome of the patient, obtaining a large amount of data [ 7 , 8 , 9 ].…”