Abstract:The object of research is traditional mining technologies and technical means in combination with underground block leaching (UBL) of metals from rock ores with their preliminary crushing with explosives in installations mounted in mine workings. One of the most problematic areas is the difficulty of achieving a given crushing quality, as well as the required height of ore storage in the chamber for the subsequent leaching of metals and a loosening factor, taking into account the control of the energy of explo… Show more
Based on the mining of deep metal mineral resources and the current in-situ
leaching mining process of uranium ore, combined with the technological
characteristics of ?fluidized mining of metal ore? and ?deep geothermal
development?, an innovative concept of strengthening the fluidized leaching
process of deep metal ore - geothermal co mining is proposed, A numerical
simulation method was used to analyze the turbulent flow and heat transfer
characteristics of a new type of heat transfer enhancement element - a swirl
plate as a support between tubes. The renormalization two equation
turbulence model was used for numerical simulation, and the SIMPLEC
algorithm was used for pressure and velocity coupling, and the enhanced wall
treatment method was used for wall treatment. The periodic changes in the
cross-sectional flow field and turbulence intensity of the unit flow channel
were analyzed, as well as the synergistic relationship between the flow
field and temperature field on the cross-section. The corresponding
variation trends of the average Nusselt number and the average synergy angle
of the cross-section were compared. The experimental results show that the
270-4.25 cyclone sheet can more fully utilize the enhanced heat transfer of
the spin flow, and the overall average Nusselt number is higher than
180-2.0, which is consistent with the experimental results. That is, ?m is
low where high Nub and ?m is high where low Nub is low, indicating that the
changing trend of the two is fully consistent with the field synergy
principle. This paper systematically analyzes the basic theoretical
bottleneck, key technical problems and future development trend in the
process of geothermal joint mining of deep metal mine, and aims to provide
reference for the strengthening of geothermal joint mining and geothermal
joint mining of deep metal ore.
Based on the mining of deep metal mineral resources and the current in-situ
leaching mining process of uranium ore, combined with the technological
characteristics of ?fluidized mining of metal ore? and ?deep geothermal
development?, an innovative concept of strengthening the fluidized leaching
process of deep metal ore - geothermal co mining is proposed, A numerical
simulation method was used to analyze the turbulent flow and heat transfer
characteristics of a new type of heat transfer enhancement element - a swirl
plate as a support between tubes. The renormalization two equation
turbulence model was used for numerical simulation, and the SIMPLEC
algorithm was used for pressure and velocity coupling, and the enhanced wall
treatment method was used for wall treatment. The periodic changes in the
cross-sectional flow field and turbulence intensity of the unit flow channel
were analyzed, as well as the synergistic relationship between the flow
field and temperature field on the cross-section. The corresponding
variation trends of the average Nusselt number and the average synergy angle
of the cross-section were compared. The experimental results show that the
270-4.25 cyclone sheet can more fully utilize the enhanced heat transfer of
the spin flow, and the overall average Nusselt number is higher than
180-2.0, which is consistent with the experimental results. That is, ?m is
low where high Nub and ?m is high where low Nub is low, indicating that the
changing trend of the two is fully consistent with the field synergy
principle. This paper systematically analyzes the basic theoretical
bottleneck, key technical problems and future development trend in the
process of geothermal joint mining of deep metal mine, and aims to provide
reference for the strengthening of geothermal joint mining and geothermal
joint mining of deep metal ore.
Показано, що резервом економіки, раціонального використання та охорони надр є залучення у виробництво некондиційних ресурсів шляхом використання технологій з вилуговування металів, які доцільно комбінувати з традиційними технологіями розробки. Встановлено, що оптимальне значення показників найчастіше досягається, коли менша частина багатої руди (до 40 %) видобувається традиційними технологіями і видається на поверхню, а її більша частина (до 60 %) бідної, некондиційної та позабалансової руди вилуговується під землею. Зокрема, найбільш інтенсивне інфільтраційне вилуговування відбувається при класі крупності рудних шматків –100 + 0 мм. Для Мічурінського родовища (ДП “СхідГЗК”, Україна) при підземному блоковому вилуговуванні металів рекомендується вихід такої фракції у відбитій руді близько 90 %. Менш інтенсивно і триваліше вилуговуються метали з фракцій –200 + 100 мм.Доведено, що основне місце при підземному блоковому вилуговуванні повинна посідати вибухова підготовка руди, що забезпечує ефективне вилучення металу із замагазинованих руд при коефіцієнті розпушування 1,15 > Кр < 1,2, який регулюється обсягом продукції, що випускається з блоку руди (до 30 %) і параметрами камер (довжина, ширина і висота). За рахунок залучення у виробництво некондиційних руд сировинна база видобутку металів на діючих шахтах може бути збільшена в 1,4–1,6 раза. Для нейтралізації і промивання відпрацьованої рудної маси рекомендовано обробляти її розчином вапна і шахтною водою через свердловини зрошувальної системи. Охорону гідрогеологічного середовища здійснювати шляхом замулювання глинистим розчином днища камери зі збору продуктивних розчинів та постійного моніторингу забруднення підземних вод у зоні впливу підземного блокового вилуговування. На основі отриманих позитивних результатів дослідження та впровадження технологій підземного блокового вилуговування металів із скельних руд при відпрацюванні блоку 5-86, відповідно до виданих рекомендацій, використаний такий же підхід і для блоків 5-84-86 та 5-88-90, а також промислово-експериментального блоку 1-75-79. Для промислового використання комбінованої традиційної технології розробки запасів родовищ варто розглянути можливість і доцільність долучення до видобутку та переробки некондиційних та позабалансових за вмістом корисних компонентів руд технологіями підземного блокового вилуговування металів.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.