Environmental Safety Analysis of Red Mud-Based Cemented Backfill on Groundwater

Abstract

As one of the main industrial solid wastes, there are a large number of free alkaloids, chemically bound alkaloids, fluoride, and heavy metal ions in Bayer process red mud (BRM), which are difficult to remove and easily pollute groundwater as a result of open storage. In order to realize the large-scale industrial application of BRM as a backfilling aggregate for underground mining and simultaneously avoid polluting groundwater, the material characteristics of BRM were analyzed through physical, mechanical, and chemical composition tests. The optimum cement–sand ratio and solid mass concentration of the backfilling were obtained based on several mixture proportion tests. According to the results of bleeding, soaking, and toxic leaching experiments, the fuzzy comprehensive evaluation method was used to evaluate the environmental impact of BRM on groundwater. The results show that chemically bound alkaloids that remained in BRM reacted with Ca2+ in PO 42.5 cement, slowed down the solidification speed, and reduced the early strength of red mud-based cemented backfill (RMCB). The hydration products in RMCB, such as AFT and C-S-H gel, had significant encapsulation, solidification, and precipitation inhibition effects on contaminants, which could reduce the contents of inorganic contaminants in soaking water by 26.8% to 93.8% and the leaching of toxic heavy metal ions by 57.1% to 73.3%. As shown by the results of the fuzzy comprehensive evaluation, the degree of pollution of the RMCB in bleeding water belonged to a medium grade Ⅲ, while that in the soaking water belonged to a low grade II. The bleeding water was diluted by 50–100 times to reach grade I after flowing into the water sump and could be totally recycled for drilling and backfilling, thus causing negligible effects on the groundwater environment.

The Recent Progress China Has Made in the Backfill Mining Method, Part III: Practical Engineering Problems in Stope and Goaf Backfill

“…For example, Zhang et al [33] proposed that safety should be considered in mining production, and numerical modeling methods such as Flac 3D should be used for practical engineering and mining method optimization; again, for example, Zhang et al [34] proposed that environmental concerns be incorporated into the evaluation and consideration of practical mining production and backfill processes, as China has introduced the concept of green mining since 2015.…”

The Recent Progress China Has Made in the Backfill Mining Method, Part II: The Composition and Typical Examples of Backfill Systems

“…With the development of science and technology [37,38], the filling system will undoubtedly mature further.…”

The Recent Progress China Has Made in High-Concentration Backfill

“…As raw material prices and the national attention to environmental protection are rising, cement as mine backfill is the most commonly used gelling material, as its prices stay high for a long time and there is still a larger rise space: some remote mining areas of bulk cement to ore prices have risen to RMB 500/t, therefore, development of a new mine backfill gelled material to replace cement has become a new research hotspot. A lot of research and application practice show that water quenching slag of smelter, fly ash of thermal power plant, yellow phosphorus slag of phosphorous chemical industry, red mud of sintering process and other materials are good cement substitutes [36,37].…”