Enhancement of energy performance in betavoltaic cells by optimizing self-absorption of beta particles

Abstract

Summary Multi‐layered Ni‐63 betavoltaic cell was investigated for improving the current density and the source efficiency. The model of betavoltaic cells, which typically consist of Ni‐63 radioisotope source, semiconductors, and electrodes, was built using MCNP6, and the emission and absorption behaviours of beta particles throughout the cell were analysed with changing geometrical shape of the betavoltaic cell and thickness of radioisotope source layer in order to achieve the improved current density and efficiency of the cell. The result showed that the fluence of beta particles generally increases with the increase of radioisotope thickness up to 10 µm in both rectangular and cylindrical geometry, while it remains nearly constant above the specific thickness because of the self‐absorption effect. Moreover, the results showed that current density of betavoltaic cell could be achieved in cylindrical geometry (1.67 μA/cm2) comparing with rectangular one (1.54 μA/cm2) based on the optimum thickness of Ni‐63 radioisotope thickness with the consideration of self‐absorption. Copyright © 2015 John Wiley & Sons, Ltd.

Planar and textured surface optimization for a tritium‐based betavoltaic nuclear battery

“…Rahmani et al, Kim et al, and Wu et al used a combination of closed form equations and Monte Carlo simulations to maximize nuclear and electrical power output based on a defined domain (i.e., radioisotope source layer thicknesses and dopant concentrations of the semiconductor junctions). However, η was never maximized nor prioritized in these publications …”

“…However, η was never maximized nor prioritized in these publications. [7][8][9][10][11] Optimization of 3-D coupling configuration with textured semiconductors and radioisotope source using experimental, analytical, and numerical methods was attempted with tritium gas and Si cylindrical array, 12 63 Ni and GaN pyramidal and cylindrical pillar array, 13 and 147 Pm and hexagonal array. 14 These textures semiconductor surfaces are produced from high aspect ratio microstructure technology (HARMST).…”

Radioluminescent nuclear battery containing CsPbBr 3 quantum dots: Application of a novel wave‐shifting agent

“…The indirect energy conversion mode can effectively reduce the radiation damage effect of the energy conversion unit in the device. This energy conversion method is expected to be applied to radiation sources with high activity and energy density …”

Enhanced radioluminescent nuclear battery by optimizing structural design of the phosphor layer

“…Specific research contents include changing experimental materials, varying physical parameters, optimizing structural design, and analyzing environmental factors . According to previous research results, it was found that selecting the excellent performance materials, proper coupling between these materials, and optimizing the battery structure are required to achieve maximum nuclear‐to‐electrical conversion efficiency . Meanwhile, in view of the indirect energy conversion mechanism of this nuclear battery, the phosphor layer is an intermediate energy transducer.…”

“…[10][11][12][13][14] According to previous research results, it was found that selecting the excellent performance materials, proper coupling between these materials, and optimizing the battery structure are required to achieve maximum nuclear-toelectrical conversion efficiency. 15,16 Meanwhile, in view of the indirect energy conversion mechanism of this nuclear battery, the phosphor layer is an intermediate energy transducer. On the one hand, the phosphor layer absorbs radiation particles bombarding, undergoes radiative excitation, and releases luminescent photons of a specific wavelength range.…”