Enhanced Response Time of Electrowetting Lenses with Shaped Input Voltage Functions

Abstract

Adaptive optical lenses based on the electrowetting principle are being rapidly implemented in many applications, such as microscopy, remote sensing, displays, and optical communication. To characterize the response of these electrowetting lenses, the dependence upon direct current (DC) driving voltage functions was investigated in a low-viscosity liquid system. Cylindrical lenses with inner diameters of 2.45 and 3.95 mm were used to characterize the dynamic behavior of the liquids under DC voltage electrowetting actuation. With the increase of the rise time of the input exponential driving voltage, the originally underdamped system response can be damped, enabling a smooth response from the lens. We experimentally determined the optimal rise times for the fastest response from the lenses. We have also performed numerical simulations of the lens actuation with input exponential driving voltage to understand the variation in the dynamics of the liquid-liquid interface with various input rise times. We further enhanced the response time of the devices by shaping the input voltage function with multiple exponential rise times. For the 3.95 mm inner diameter lens, we achieved a response time improvement of 29% when compared to the fastest response obtained using single-exponential driving voltage. The technique shows great promise for applications that require fast response times.

Three dimensional two-photon imaging of neuronal activity in freely moving mice using a miniature fiber coupled microscope with active axial-scanning

“…The ability to perform scanning at different angles allows coverage of the brain region of interest for a given experiment. In general, the waveform applied to the EWTL was a simple sawtooth function, however new methods for voltage-function shaping can optimize the speed and dynamics of tunable lenses based on electrowetting 30 .…”

Two-photon laser scanning microscopy with electrowetting-based prism scanning

“…While the function is determined using the steady state scan angle variation of the device, the scan angle variation still has some small time-dependent nonlinearity. This can be attributed to the time-dependent response of the EWOD prism upon actuation and an actuation delay introduced by the RC characteristics of the EWOD device [29]. Upon integration with the 2PE microscope, a scan range of ± 2° was obtained as a result of the physical implementation of the EWOD prism device.…”

“…EWOD prism actuation of as fast as 21°/sec could be used to obtain lower resolution images. This actuation speed can be further improved by using techniques like voltage shaping [29] or resonance mode scanning, to reduce the scan time and implementation for fast axis scanning. The image shown in Fig.…”

Driving Waveform Design of Electrowetting Displays Based on an Exponential Function for a Stable Grayscale and a Short Driving Time

“…However, the driving waveform increases the oscillation range of the aperture ratio and lengthens the driving time [17]. However, the damped oscillation of an electrowetting liquid drop can be optimized by changing the rising speed of the driving waveform, and the transition between the under-damping state and the over-damping state in the electrowetting lens is realized [18], which provides a reference direction for optimizing the driving waveform of the EWDs.…”