Enhanced N₂affinity of 1T-MoS₂with a unique pseudo-six-membered ring consisting of N–Li–S–Mo–S–Mo for high ambient ammonia electrosynthesis performance

Abstract

Selective electrocatalytic NH3 synthesis using Li intercalated 1T-MoS2.

Gold Nanorod-Decorated Metallic MoS2 Nanosheets for Synergistic Photothermal and Photodynamic Antibacterial Therapy

“…As shown in Figure 4, the XR trum of 1T-MoS2 NSs revealed two critical peaks at 9.6° and 19.1°, correspondin crystal planes of (002) and (004) of the 1T-MoS2 NSs (JCPDS No. 37-1492), resp [57]. The XRD pattern of AuNRs revealed three main XRD peaks located at 38.2 and 64.6°, corresponding to the crystal planes of (111), (200), and (220), resp [58,59].…”

Cost-Effective 1T-MoS2 Grown on Graphite Cathode Materials for High-Temperature Rechargeable Aluminum Ion Batteries and Hydrogen Evolution in Water Splitting

“…Figure 1b shows the Raman spectrum of 1T-MoS 2 /SP-1. The peaks at 150, 200, 290, and 350 cm −1 were ascribed to J 1 , J 2 , E 1g , and J 3 of 1T-MoS 2 , respectively [19,22]. The peak at 1580 cm −1 corresponded to the G band of SP-1 [9].…”

“…The resulting solution was mixed with 300 mg of SP-1 graphite powder. Then, the mixture was transferred to the Teflon container, and the hydrothermal reaction was carried out at 180 • C for 24 h. After cooling to room temperature, the final product was collected, washed with water and ethanol several times, and then dried at 70 • C for 12 h. As a comparison, only the 1T-MoS 2 materials were synthesized without adding SP-1 graphite powder [19]. Figure 1a shows the X-ray diffraction (XRD) patterns of 1T-MoS 2 /SP-1.…”

“…Figure 1a shows the X-ray diffraction (XRD) patterns of 1T-MoS 2 /SP-1. The peaks at 2θ~9.30 • , 18.26 • , and 32.80 • were indexed to (002), (004), and (100) planes of 1T-MoS 2 crystal structure, respectively [19,22]. The peak at 2θ~26.70 • was indexed to the (002) plane of graphite.…”

“…Molybdenum disulfide (MoS 2 ) has been established as an excellent energy-storage material owing to its layer structure and high active sites similar to those of graphene [19][20][21][22]. However, the performance of MoS 2 is not adequate, thereby limiting its applications in AIBs [23,24].…”