Endurance limit of the axial-piston hydraulic machine cylinder block

Abstract

The fatigue resistance of the cylinder block (CB) of an axial-piston hydraulic machine (APHM) made of tin bronze CuSn12 has been investigated. Fatigue tests of smooth and notched standard samples were performed and fatigue curves were constructed. The stress state of the CB is investigated by the finite element method. It is established that the maximum stresses are localized on a small part of the partition between axial cylinders holes loaded by internal pressure. A method for recalculating the established length of this zone of partition with an uneven distribution of dangerous stresses by an equivalent length with a constant stress equal to the maximum is proposed. The use of the statistical theory of the similarity of the fatigue failure of Serensen-Kogayev, the results of the fatigue tests of the samples and the calculation of the equivalent length made it possible to determine the endurance limit of the CB considered. The acceptability of the proposed method estimating the endurance limit by the known results of resource tests of the CB APHM 210.25 is confirmed.

The lifetime forecasting of machine elements by fatigue strength criterion

“…To find the parameters m and C of equation ( 1) of the fatigue curve of the part, the technique presented in [15] was used. Its essence lies in the fact that the results of fatigue tests of samples performed at a symmetric cycle of stress variation are subject to correction.…”