Emerging trends in 2D nanotechnology that are redefining our understanding of “Nanocomposites”

Liu, Pingwei; Cottrill, Anton L.; Kozawa, Daichi; Koman, Volodymyr B.; Parviz, Dorsa; Liu, Albert Tianxiang; Yang, Jingfan; Tran, Thang Q.; Wong, Min Hao; Wang, Song; Strano, Michael S.

doi:10.1016/j.nantod.2018.04.012

Cited by 68 publications

(54 citation statements)

References 259 publications

(366 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Graphene materials are the most promising candidate for various applications in many elds of materials science because of their excellent mechanical, thermal, and electrical properties. Specically, graphene materials produced in powder form are suitable for advanced composites, 1 medicine, 2 medical devices, 3 sensors, 4 electronics, 5 fuel cells, 6 solar cells, 7 capacitors, 8 batteries, 9 thermal management applications, 10 display materials and packaging, 11 inks and 3D printer materials, 12 barriers and lms, 13 environmental protection, 14 etc.…”

Section: Introductionmentioning

confidence: 99%

Mass production of graphene materials from solid carbon sources using a molecular cracking and welding method

Yan

Zhang

et al. 2019

J. Mater. Chem. A

View full text Add to dashboard Cite

A novel process is developed for high-volume production of low-cost graphene materials from any solid carbon resources, especially biomass sources. Few-layer graphene materials from solid carbon resources are produced through a molecular cracking and welding (MCW) method. The MCW technique is a single step process with two stages, i.e., graphene-encapsulated core-shell nanoparticles are first formed by catalytic thermal treatment of solid carbon materials. Then in the second stage these core-shell structures are opened by 'cracking molecules', and the cracked graphene shells are self-welded and reconstructed to form high quality multilayer graphene materials at a heating temperature with selected welding reagent gases. This novel graphene material with super hydrophobic properties can be used to filter water from crude oil emulsions in the petroleum industry.

show abstract

Section: Introductionmentioning

confidence: 99%

Mass production of graphene materials from solid carbon sources using a molecular cracking and welding method

Yan

Zhang

et al. 2019

J. Mater. Chem. A

View full text Add to dashboard Cite

show abstract

“…Identifying the influence regularities of fillers, chemical and technological factors on the formation processes of composites with deepening the scientific ideas about the formation structure, studying their physical, mechanical and tribotechnical characteristics, allows control of the properties of polymer composites, that is one of the important problems of contemporary polymer materials science [Liu 2018]. The implementation of matrix and fillers modification methods and application of composites formation technology [Khoshnevis 2018] on the basis of polymers under the influence of external physical fields solves the important scientific and technical problem of polymer composites development and it defines the relevance of this research direction.…”

Section: Introductionmentioning

confidence: 99%

The Results of Theoretical and Experimental Studies of Tribotechnical Purposes Composites on the Basis of Epoxy Composite Material

Panda¹,

Dyadyura²,

Savchuk³

et al. 2019

MM SJ

View full text Add to dashboard Cite

“…The unique properties of carbon nanotubes have led to various applications in biological and environmental fields [30,31]. There has been much interest regarding carbon nanotubes in nanomedicine and tissue engineering applications [32][33][34][35][36][37][38][39].…”

Section: Introductionmentioning

confidence: 99%

Controlling the Dissolution Rate of Hydrophobic Drugs by Incorporating Carbon Nanotubes with Different Levels of Carboxylation

Mitra

2019

Applied Sciences

View full text Add to dashboard Cite

We present the anti-solvent precipitation of hydrophobic drugs griseofulvin (GF) and sulfamethoxazole (SMZ) in the presence of carboxylated carbon nanotubes (f-CNTs). The aqueous dispersed f-CNTs were directly incorporated into the drug particles during the precipitation process. f-CNTs with different levels of carboxylation were tested where the hydrophilicity was varied by altering the C:COOH ratio. The results show that the hydrophilic f-CNTs dramatically enhanced the dissolution rate for both drugs, and the enhancement corresponded to the hydrophilicity of f-CNTs. The time to reach 80% dissolution (t80) reduced from 52.5 min for pure SMZ to 16.5 min when incorporated f-CNTs that had a C:COOH ratio of 23.2 were used, and to 11.5 min when the ratio dropped to 16. A corresponding decrease was observed for SMZ for the above-mentioned f-CNTs.The study clearly demonstrates that it is possible to control the dissolution rate of hydrophobic drugs by altering the level of carboxylation of the incorporated CNTs.

show abstract

Emerging trends in 2D nanotechnology that are redefining our understanding of “Nanocomposites”

Cited by 68 publications

References 259 publications

Mass production of graphene materials from solid carbon sources using a molecular cracking and welding method

Mass production of graphene materials from solid carbon sources using a molecular cracking and welding method

The Results of Theoretical and Experimental Studies of Tribotechnical Purposes Composites on the Basis of Epoxy Composite Material

Controlling the Dissolution Rate of Hydrophobic Drugs by Incorporating Carbon Nanotubes with Different Levels of Carboxylation

Contact Info

Product

Resources

About