“…In addition, the experimental LOD (LOD=95 nmol L −1 ) was also calculated, taking into account the signal/noise ratio (S/N=3), where S is the peak current magnitude of the analyte and N is the current variation of the electrochemical measurements performed in blank solution. The analytical parameters obtained in this work were compared with those reported in previous studies published in the literature [14, 15, 27–43] ‐ see Table 1. As can be noted, several studies reported in the literature have employed different electrochemical sensors for the electrochemical sensing of ciprofloxacin, where different detectability levels and linear ranges were obtained.…”