Efficient Wireless Monitoring and Control of a Grid-Connected Photovoltaic System

Abstract

The design, monitoring, and control of photovoltaic (PV) systems are complex tasks that are often handled together, and they are made even more difficult by introducing features such as real-time, sensor-based operation, wireless communication, and multiple sensor nodes. This paper proposes an integrated approach to handle these tasks, in order to achieve a system efficient in tracking the maximum power and injecting the energy from the PV modules to the grid in the correct way. Control is performed by means of an adaptive Lyapunov maximum power point tracking (MPPT) algorithm for the DC/DC converters and a proportional integral (PI) control for the inverters, which are applied to the system using low latency wireless technology. The system solution exploits a low-cost wireless multi-sensor architecture installed in each DC/DC converter and in each inverter and equipped with voltage, current, irradiance, and temperature sensors. A host node provides effective control, management, and coordination of two relatively independent wireless sensor systems. Experimental validation shows that the controllers ensure maximum power transfer to the grid, injecting low harmonic distortion current, thus guaranteeing the robustness and stability of the system. The results verified that the MPPT efficiency is over 99%, even under perturbations and using wireless communication. Moreover, the converters’ efficiency remains high, i.e., for the DC/DC converter a mean value of 95.5% and for the inverter 93.3%.

Design and Performance of a XBee 900 MHz Acquisition System Aimed at Industrial Applications

“…This technology has been thoroughly used in monitoring applications in different domains, such as remote healthcare, industrial control, fire detection and environmental monitoring. Some works describe the application in smart grids devices [34][35][36]. This technology is frequently used in home/building automation applications [37][38][39].…”