Effective use of an extraoral vacuum in preventing the dispersal of particulate matter from metal dental materials

Abstract

ObjectivesWhen dentists adjust prostheses at the dental chairside, particulate matter (PM) from the dental material is dispersed. Little is known about the effective use of an extraoral vacuum (EOV) in preventing PM dispersal. This study aimed to evaluate the effective use of an EOV in preventing the dispersal of metal PM in dental offices.MethodsThe following experimental conditions were planned: the distance from the EOV to the metallic materials (50, 100, 150, and 200 mm), the horizontal angle between the long axis of the micromotor handpiece and EOV (0°, 45°, and 90°), and the operating time of the EOV (during grinding, during grinding and 1 min thereafter, during grinding and the preceding 1 min, 1 min before and after grinding, and during grinding). Carborundum and silicone points were used for grinding and PM dispersal. Diameters (0.3, 0.5, 1.0, and 3.0 μm) were measured using a laser particle counter.ResultsDepending on the instrument used to grind, there were undetectable PMs of different diameters (Carborundum point: 0.3 and 0.5 μm, Silicone point: 0.3 μm). PMNs were reduced as the distance from the EOV to metal materials decreased. Operating the EOV before grinding along the long axis of the micromotor handpiece was effective in reducing the PMNs.ConclusionPMNs dispersed when grinding metals were effectively reduced by positioning the EOV closer to the grinding surface (within 150 mm) along the long axis of the micromotor handpiece and operating the EOV before grinding.