Effect of Working Range on Productivity and Costs of Harvesting Machines in a Eucalyptus Stand

Abstract

Wood harvesting should be planned to reduce environmental impacts by minimizing machine traffic, increase productivity and reduce costs. In this context, the aim of this study was evaluate the effect of working range on operational performance of a harvester and forwarder in a Eucalyptus saligna stand under a clear cutting regime. The study was carried out in Paraná State, Brazil, in a cut‐to‐length system in cutting and wood extraction operations in two working ranges: T1 - width of 12 m with a cut of four planting lines; and T2 - width of 18 m with a cut of six planting lines. A time and motion study was performed to determine work cycle times, productivity, production costs, and machine traffic, with working ranges compared by the t-test (α = 0.05) for independent samples. The results showed that the wood processing and loading elements consumed the longest operating cycle time in cutting and wood extraction. The harvester machine presented higher productivity (61.05 m³ PMH0-1) in the T1 working range, while the forwarder was superior (48.32 m³ PMH0-1) in the T2 working range. Regarding the wood harvesting system, it was observed that the T2 working range enabled a reduction of 1% in production costs, which is important when considering the large scale production of the company, while there was a 33.4% reduction in traffic. Therefore, an increase in machines’ working range can provide operational and environmental benefits to wood harvesting operations in forest plantations.