Effect of Water Vapor on Pore Structure, Surface Functional Groups, and Combustion Performance of Pyrolytic Semicoke

Abstract

The coal tends to be affected by the water vapor from quenching coke process in the pyrolysis process during the coal carbonization process and in turn causes the variation of physicochemical properties of semicoke. The preparation of semicoke based on different pyrolysis temperatures and water vapor content was carried out in order to investigate the influence of water vaper on physicochemical properties of the pyrolytic semicoke, combined with specific surface area analysis and thermal analysis to study the pore structure and combustion properties of semicoke. The morphology of the semicoke and the alteration rule of carbon-containing functional groups were analyzed by scanning electron microscopy and X-ray photoelectron spectroscopy. The result indicates that adding an appropriate amount of water vapor (40%) instead of excess (60%) in the pyrolysis process (800 °C) is beneficial to the increase of the proportion of fixed carbon and the removal of volatile and ash. The specific surface area and the combustion performance of the semicoke is significantly improved when the appropriate amount of water vapor was added. The water vapor content has a slight effect on surface functional groups when the temperature ranges from 500 to 700 °C, whereas the higher water vapor content inhibits the improvement of physicochemical properties of the semicoke when the pyrolysis temperature is higher (800 °C). Therefore, the entry of excess water vapor (60%) into the high-temperature pyrolysis section should be avoided in the process of quenching coke or it would have an adverse impact on the performance of semicoke.