Effect of reinforcement nanoparticles addition on mechanical properties of SBS/curauá fiber composites

Abstract

Composites of styrene-butadiene-styrene triblock copolymer (SBS) matrix with curauá fiber and/ or a nanoparticulate mineral (montmorillonite clay -MMT) used as reinforcing agents were prepared by melt-mixing. The influence of clay addition on properties like tensile and tear strength, rebound resilience, flex fatigue life, abrasion loss, hardness and water absorption of composites with 5, 10 and 20 wt% of curauá fiber was evaluated in presence of maleic anhydride grafted styrene-(ethyleneco-butylene)-styrene triblock copolymer (MA-g-SEBS) coupling agent. Furthermore, the effect of mineral plasticizer loading on tensile strength of selected composites was investigated. The hybrid SBS composite that showed the best overall mechanical performance was composed by 2 wt% of MMT and 5 wt% of curauá fiber. Increasing fiber content up to 20 wt% resulted in a general decrease in all mechanical properties as well as incorporation of 5 wt% MMT caused a decrease in the tensile strength in all fiber contents. The hybrid composites showed clay agglomerates (tactoids) poorly dispersed that could explain the poor mechanical performance of composites at higher concentrations of curauá fiber and MMT nanoparticles. The addition of plasticizer further decreased the tensile strength while the addition of MMT nanoparticles decreased water absorption for all SBS composites.

Mechanical characteristics of groundnut shell particle reinforced polylactide nano fibre

“…Thus, this allows for efficient stress transfer between the matrix and the fibres [5] unlike untreated filler filled composites. The decline after saturation is attributed to agglomeration and sediment effects associated with higher filler content [6] or poor wetting between the fillers and matrix resulting in formation of micro-cracks [7]. The untreated GSP-PLA fibre showed superior UTS at 5 wt.…”

Effect of the Glycerol and Lignin Extracted from Piassava Fiber in Cassava and Corn Starch Films

“…This can be proven by the high number of patents, papers and products already marketed [1][2][3][4][5][6] . Piassava fibers are extracted from the palm tree Attalea funifera Martius.…”

A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites

“…The environmental awareness attracted researchers to develop new composites with addition of more than one reinforcement from natural resources, such as natural fiber/natural fiber or natural fiber/nanofiller from organic sources as an alternative to synthetic fibers [13]. Hybridization involving the combination of nanofiller and natural fiber in the matrix results reduction of water absorption properties and increased in mechanical properties [14]. Several research works depicts all these facts.…”