Effect of Reactive Diluents and Kaolin on the Mechanical Properties of Epoxy Resin

Abstract

Epoxy resin was modified using phenyl diglycidyl ether (PGE), xylene and kaolin. The impact strength (IS), critical stress intensity factor (K), flexural strength and glass transition temperature (Tg) were evaluated as functions of the modifier content. It was found that the addition of diluents led to a significant reduction of both viscosity and Tg. A three-fold increase of IS was obtained with the addition of 2.5% PGE. Moreover, the addition of 15% PGE resulted in about 145% enhancement of the KC parameter. However, the addition of xylene had no significant effect on these properties. Furthermore, the addition of 10% kaolin to epoxy resin gave compositions with the highest fracture toughness. Maximum KC values were obtained with epoxy hybrid compositions containing 10% kaolin and 2.5% PGE and 10% kaolin and 5% PGE respectively. All tested compositions had higher energy at break than nonmodified epoxy resin. SEM micrographs of fractured surfaces of modified epoxy compositions revealed the presence of plastic deformations, which can be considered as the main source of the mechanical properties enhancement.

Photocross-linking of glycerol diglycidyl ether with reactive diluents

“…The addition of reactive diluent can enable to control important parameters such as viscosity, morphology and mechanical properties [18][19][20][21]. Reactive diluents increase the homogeneity of the reaction mixtures and decrease their viscosity.…”

Reinforcing effect of amine‐functionalized and carboxylated porous graphene on toughness, thermal stability, and electrical conductivity of epoxy‐based nanocomposites

“…Lowering viscosity of epoxy by adding a (reactive) diluent could lead to the formation of well‐dispersed nanoparticles in the resin, thereby easing its processability. Between several classifications of diluents, the ones based on epoxides can enter the epoxy network via a chemically reaction and can therefore render optimal influences on both properties and processing of the resin mixtures in addition to causing less harm to the environment . As an example, researchers examined viscosity of epoxy using three kinds of epoxy resins and reactive diluents.…”

Thermo-protective properties of polymer composites with nano-titanium dioxide

“…An important advantage of hybrid materials is a unique combination of mechanisms for properties improvement which may lead to synergistic effect unrealizable with traditional composites with one modifier (Bakar et al 2014;Szymanska et al 2017). Due to the ease of processing and fairly good physical properties, there is an increasing interest in using not only thermoplastics but also thermosetting plastics as matrix for composite materials (Kucharczyk et al 2013;Bakar et al 2010, Szymanska et al 2017.…”