Effect of Operating Parameters and Energy Expenditure on the Biological Performance of Rotating Biological Contactor for Wastewater Treatment

Abstract

The rotating biological contactor (RBC) is resistant to toxic chemical and shock loadings, and this results in significant organic and nutrient removal efficiencies. The RBC system offers a low-energy footprint and saves up to 90% in energy costs. Due to the system’s low-energy demand, it is easily operable with renewable energy sources, either solar or wind power. An RBC was employed to degrade pollutants in domestic wastewater through biodegradation mechanisms in this study. The high microbial population in the RBC bioreactor produced excellent biological treatment capacity and higher effluent quality. The results showed that the RBC bioreactor achieved an average removal efficiency of 73.9% of chemical oxygen demand (COD), 38.3% of total nitrogen (TN), 95.6% of ammonium, and 78.9% of turbidity. Investigation of operational parameters, disk rotational speed, HRT, and SRT, showed the biological performance impact. Disk rotational speed showed uniform effluent quality at 30–40 rpm, while higher values of disk rotational speed (>40 rpm) resulted in lower effluent quality in COD, TN, and turbidity. The longer hydraulic retention time and sludge retention time (SRT) facilitated higher biological performance efficiency. The longer SRTs enabled the higher TN removal efficiency because of the higher quantity of microbial biomass retention. The longer SRT also resulted in efficient sludge-settling properties and reduced volume of sludge production. The energy evaluation of the RBC bioreactor showed that it consumed only 0.14 kWh/m3, which is significantly lower than the conventional treatment methods; therefore, it is easily operable with renewable energy sources. The RBC is promising substitute for traditional suspended growth processes as higher microbial activity, lower operational and maintenance costs, and lower carbon foot print enhanced the biological performance, which aligns with the stipulations of ecological evolution and environment-friendly treatment.

Nanofiltration PVP Membrane with Gradient Cross-Linking for Efficient Polycyclic Aromatic Hydrocarbons Removal

“…A hydrophobic membrane has a contact angle greater than 90°, typically from 90 to 180° . Hydrophobic membranes repel water or polar solvents and are more compatible with nonpolar liquids . It is important to note that various factors, including surface chemistry, roughness, temperature, and the nature of the fluid in contact with the membrane, can influence the contact angle of a membrane. , …”

“…39 Hydrophobic membranes repel water or polar solvents and are more compatible with nonpolar liquids. 40 It is important to note that various factors, including surface chemistry, roughness, temperature, and the nature of the fluid in contact with the membrane, can influence the contact angle of a membrane. 41,42 The contact angle of a membrane has an effect on membrane fouling.…”

Multi-Objective Optimization Based on Simulation Integrated Pareto Analysis to Achieve Low-Carbon and Economical Operation of a Wastewater Treatment Plant

“…It has been noted that when the SD increases, the EQI value of the case plant also tends to increase, as depicted in Figure 3f. This is reason that higher SD results in a shorter SRT and lower concentration of mixed liquor suspended solids (MLSS), which are unfavorable conditions for biological treatment [33]. As a result, the effluent quality decreases.…”

Effect of Operating Parameters on the Performance of Integrated Fixed-Film Activated Sludge for Wastewater Treatment

“…HRT is an important factor that determines the performance of the IFAS. Hydraulic loading is another important parameter directly determining HRT, influencing the reactor size [ 61 , 62 ]. It directly affects the performance efficiency by controlling the hydraulic loading.…”