Effect of ignition advance angle offset in a dual ignition system of a large aircraft piston engine

Abstract

The paper presents the results of the experimental research on the combustion process inside the cylinder of a large piston radial aircraft engine with dual spark plug ignition. The tests were carried out on the ASz-62IR-16X radial engine equipped with a double, electronically controlled ignition system with two spark plugs in each cylinder. The constant engine speed tests allowed for comparing the combustion processes with ignition carried out with different ignition advance angle offset between both spark plugs. In the test, the ignition advance angle for one spark plug was changed while leaving the ignition advance angle for the other spark plug. The tests performed for two engine operating points were to change the angle of the front spark plug and the rear spark plug. The analyses were based on the recorded pressure signal from one of the engine cylinders. It has been shown that the ignition advance angle offset significantly affects the combustion process. The obtained results indicate the leading role of the rear spark plug in initiating the combustion process. When ignition is carried out with a steady rear spark plug advance angle, the combustion process practically does not change when the ignition advance angle of the front spark plug changes. However, changing the rear spark plug advance angle at a constant front spark plug ignition advance angle significantly changes the combustion process.

9th International Congress on Combustion Engines (PTNSS 2021) special issue

“…Czarnigowski et al 3 investigated the combustion in a large-bore radial aircraft engine with twin spark ignition. The engine tests using an advanced electronic control revealed the effects of the ignition offset between the two spark plugs.…”

Performance and Emission of the Aircraft with Hybrid Propulsion During Take-Off Operation Cycle

“…The new aircraft propulsion systems under development should meet the restrictive standards and demand, and should be characterized by high efficiency, fuel efficiency, low fuel consumption and lower emissions of pollutants into the atmosphere. Research is being conducted on modifications to aircraft propulsion to improve its performance [10][11][12].…”

Acoustic emission-based intelligent identification of piston aero-engine ignition advance angle anomalies

“…In the past few years, many scholars have made extensive research on the influence of ignition advance angle on engine performance. Jacek et al found that the magnitude of the ignition advance angle has a significant impact on the combustion process in the engine cylinder by analyzing the cylinder pressure signal 3 . If the ignition advance angle is too large, the maximum combustion pressure in the cylinder will be reached before the piston reaches the top dead center; if the ignition advance angle is too small, the mixture in the cylinder will not be fully burned until the piston travels down a long distance.…”