Effect of Film Thickness on the Structural and Physical Properties of CdZnTe Thin Films

Abstract

Different thickness of CdZnTe films were deposited onto glass substrates by RF magnetron sputtering from Cd0.9Zn0.1Te crystals target. Their structural characteristics were studied by X-ray diffraction (XRD). The XRD experiments showed that the films are polycrystalline and have a zinc-blende (cubic) structure. The crystallite size and micro-strain were calculated. It is observed that the crystallite size increases and micro-strain decreases with the film thickness. The optical measurements showed that the average transmittance of all the samples have is less than 50% in the visible range. The possible optical transition in these films is found to be allowed direct transition with energy gap increase from 1.53 to 1.75 eV. For the electrical properties, the sheet resistivity decreased from 2.582×108 to3.069×107 Ohm/sq when the thickness increased from 307 to 823 nm; while the carrier concentration seems to be less affected by the film thickness. This behaviour in electrical properties was explained by the crystallinity and the grain size evolution.

Effect of thickness on physical properties of electron beam vacuum evaporated CdZnTe thin films for tandem solar cells

“…It also offers some possibilities to modify the preparation conditions followed by study the correlation between the physical properties of deposited films and deposition parameters. The properties of deposited and treated CdZnTe thin films are strongly dependent on the deposition conditions such as film thickness, vacuum order, substrates, annealing treatment, doping treatment, substrate temperature, growth temperature etc [16]. Among these factors, the film thickness plays a crucial role in the optical properties and conductivity behavior which can be affected by the grain boundaries whose presence and density are closely related to the crystallites size and orientation.…”

CdZnTe thin films as proficient absorber layer candidates in solar cell devices: a review

“…The electrical properties of films such as current and voltage behavior, resistivity, conductivity, carrier concentration, and mobility can be investigated using a source meter/electrometer 112 and Hall measurement system. 127 Generally, a source meter/electrometer is a device used to measure the electrical properties of materials and thin films precisely, which measures the current flow or potential difference of charges. By coupling a source meter with a solar simulator, it can also be employed to determine the electrical properties and performance parameters of solar cell devices.…”