Discrete element modeling of tool‐rock interaction I: rock cutting

Abstract

SUMMARYTool‐rock interaction processes can be classified as indentation or cutting depending on the direction of motion of the tool with respect to the rock surface. The modes of failure induced in the rock by an indenting or a cutting tool can be ductile and/or brittle. The ductile mode is associated with the development of a damage zone, whereas the brittle mode involves the growth of macrocracks. This is the first part of a series of two papers concerned with an analysis of the cutting and the indentation processes based on using the discrete element method. In this paper, numerical simulations of the cutting process are conducted to reproduce the transition from a ductile to a brittle failure mode with increasing depth of cut, which is observed in experiments. The numerical results provide evidence that the critical depth of cut d * controlling the failure mode transition is related to the characteristic length ℓ = (KIc ∕ σc)2 with KIc denoting the material toughness and σc its unconfined compressive strength. The nature of frictional contact between the cutter face and the rock in the ductile failure mode is also examined. It is shown that the inclination of the total cutting force is controlled by a multi‐directional flow mechanism ahead of the cutter that is related to the formation of a wedge of failed material, intermittently adhering to the cutter. As a result, the inclination of the total cutting force varies with the rake angle of the cutter and cannot be considered an intrinsic measure of the interfacial friction between the cutter and the rock. Copyright © 2012 John Wiley & Sons, Ltd.

Numerical methods for hydraulic fracture propagation: A review of recent trends

“…A particularly important point relates to the macroscopic fracture energy. Macroscopic fracture toughness is intrinsically related to the meso-scale discretization lengthscale (Huang and Detournay, 2008;Huang et al, 2013); it fixes the meso-scopic discretization length of this type of model. These meso-scale models allow to investigate with little additional developments very complex fracture geometries, such as near-wellbore effects on fracture growth (Grassl et al, 2015) and interactions with pre-existing fractures in 3D (Damjanac and Cundall, 2016).…”

Application of an enhanced discrete element method to oil and gas drilling processes

“…The values of the global DEM parameters can be found using different procedures. Some authors [4,6,7] have used numerical experiments for determining the relationships between DEM and continuum parameters expressed in dimensionless form. This method has been used by the authors in previous works [9][10][11][12][17][18][19][20].…”

New Computer Simulation Procedure of Heading Face Mining Process with Transverse Cutting Heads for Roadheader Automation

“…A computer simulation of a roadheader mining process can be performed with various modelling methods. One of the research directions in this field is to use the finite elements and discrete elements method, as well as neural networks for the purpose of rock mining process modelling (Huang et al, 2013;Jaime et al, 2010;Jamie, 2011;Kui-Dong et al, 2012;Rojek et al, 2010;Shenghua, 2004;Xiang & Duan, 2014;Xueyi et al, 2012). An alternative approach is to analyse breakout graphics.…”