Direct Observation of Conversion Between Threshold Switching and Memory Switching Induced by Conductive Filament Morphology

Abstract

Although the kinetics of CF formation/ dissolution is still unclear, it is widely accepted that the CF formation/dissolution is strongly related to the electromigration and electrochemical reaction of anion (i.e., oxygen vacancy) [13][14][15][16] or cation (i.e., Cu 2+ , Ag + or Ni 2+ ). [17][18][19][20][21][22] Generally, RS behavior can be classifi ed as two modes: nonvolatile memory switching (MS) and volatile threshold switching (TS). In the MS mode, both LRS and HRS can be maintained after removing the external voltage, while the LRS in the TS mode will be back to the HRS once the applied voltage is smaller than a critical value. [23][24][25] To avoid confusion with MS, the LRS and HRS in TS are renamed as "TS ON-state" and "TS OFFstate" in this article. The MS device can be used for the non-volatile data storage [1][2][3][4][5] while TS device can be as a selector in series with memory cell to suppress crosstalk effect in the crossbar array. [26][27][28][29][30] Recently, some groups reported that TS and MS can coexist and mutually transform in a single device at suitable external excitation. [23][24][25][26][27][28] Several models have been proposed to explain this phenomenon, including CF thermal instability, [ 23 ] strong electron correlation effect, [ 24 ] quantum-wire model, [ 25 ] interface barrier modulation, [ 26 ] and space charge effect. [ 27 ] However, the underlying mechanism of the phenomenon is still unclear, especially lacking of direct evidences to uncover when and how the two RS modes happen and what is the internal relationship between them.Here, we demonstrate that the TS and MS modes can be modulated in the Ag/SiO 2 /Pt structure by controlling the compliance current ( I CC ) in electroforming. We systematically investigate the morphologies, chemical components, and dynamic growth of the CF using scanning electron microscope (SEM), high-resolution transmission electron microscopy (HRTEM) and electron energy loss spectroscopy (EELS) analysis. The results confi rm that the TS and MS modes correspond to the CF consisting of isolated and continuous Ag nanocrystals, respectively. In addition, by Kelvin probe force microscopy (KPFM) studies, the voltage potential distribution of CF in the ON-and OFF-state further indicate that the TS mode is Volatile threshold switching (TS) and non-volatile memory switching (MS) are two typical resistive switching (RS) phenomena in oxides, which could form the basis for memory, analog circuits, and neuromorphic applications. Interestingly, TS and MS can be coexistent and converted in a single device under the suitable external excitation. However, the origin of the transition from TS to MS is still unclear due to the lack of direct experimental evidence. Here, conversion between TS and MS induced by conductive fi lament (CF) morphology in Ag/SiO 2 /Pt device is directly observed using scanning electron microscopy and high-resolution transmission electron microscopy. The MS mechanism is related to the formation and dissolution of CF consisting of continuous Ag...

Mechanism for resistive switching in chalcogenide-based electrochemical metallization memory cells

“…37 The inferred growth direction of Cu filament in Cu/ZnS/Pt is similar to that in oxide-based ECM cells. 17,[37][38][39][40][41] The formation of the Cu filament may result from the bipolar electrochemical mass transfer of Cu nanoclusters in ZnS. 17,41 As mentioned previously, the As 2 S 3 :Ag-, 33 GeSe:Ag-, 34 GeS:Cu-, 35 and Ag 2 S-based (Ref.…”

Memristor with Ag‐Cluster‐Doped TiO2 Films as Artificial Synapse for Neuroinspired Computing

“…The gradual conduction modulation might be correspond to variation of gap distance under electrical field-driven, which is well similar to the other reports. [35] In fact, in this stage, the total resistance (R) of the device can be described as R = ΣR ij = V/I according to the equivalent circuit. R ij is defined as the tunneling resistance of the corresponding tunneling junction between two Ag metallic clusters.…”

Anatomy of Ag/Hafnia‐Based Selectors with 1010 Nonlinearity

“…Although hypotheses based on Rayleigh instability, electronic tunneling, and opposing chemical/mechanical force has been proposed for Ag and Cu based systems in an attempt to explain the underlying RESET transition, a detailed experimental study of the microstructure and composition of the conducting channel responsible for the volatile switching is still lacking. [33,38,39] We report here a new symmetric bidirectional threshold switching selector device with features including high selectivity of 10 10 , steep turn on slope of <1 mV/dec, high endurance beyond 10 …”