Digital material fabrication using mask‐image‐projection‐based stereolithography

Abstract

Purpose -The purpose of this paper is to present a mask-image-projection-based stereolithography (MIP-SL) process that can combine two base materials with various concentrations and structures to produce a solid object with desired material characteristics. Stereolithography is an additive manufacturing process in which liquid photopolymer resin is cross-linked and converted to solid. The fabrication of digital material requires frequent resin changes during the building process. The process presented in this paper attempts to address the related challenges in achieving such fabrication capability. Design/methodology/approach -A two-channel system design is presented for the multi-material MIP-SL process. In such a design, a coated thick film and linear motions in two axes are used to reduce the separation force of a cured layer. The material cleaning approach to thoroughly remove resin residue on built surfaces is presented for the developed process. Based on a developed testbed, experimental studies were conducted to verify the effectiveness of the presented process on digital material fabrication. Findings -The proposed two-channel system can reduce the separation force of a cured layer by an order of magnitude in the bottom-up projection system. The developed two-stage cleaning approach can effectively remove resin residue on built surfaces. Several multi-material designs have been fabricated to highlight the capability of the developed MIP-SL process. Research limitations/implications -A proof-of-concept testbed has been developed. Its building speed and accuracy can be further improved.The tests were limited to the same type of liquid resins. In addition, the removal of trapped air is a challenge in the presented process. Originality/value -This paper presents a novel and a pioneering approach towards digital material fabrication based on the stereolithography process. This research contributes to the additive manufacturing development by significantly expanding the selection of base materials in fabricating solid objects with desired material characteristics.

Design and mechanical characterization of solid and highly porous 3D printed poly(propylene fumarate) scaffolds

“…It must be noted, however, that the 3D printed solid cylinders were fabricated with an increased exposure time of 180 s per layer. The long exposure time was necessary to overcome the capillary force between the part and the 3D printer vat, a problem common to mask projection stereolithography [34], and may serve to strengthen the bond between layers.…”

Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion

“…1(a)] [20][21][22] that extends the capability of previous single-material stereolithography systems [23][24][25][26][27][28][29]. Briefly, we use patterned UV or blue light to cure photocurable presolutions and manufacture three-dimensional structures layer by layer.…”

Development of Multi-Material DLP 3D Printer

“…종래의 기술은 사용 재료의 범위 제약이 한계 점으로 지적되어 왔고, 그렇기 때문에 다물질 재료를 이용한 3차원 [3] . 그 중에서도 DLP 3차 원 프린팅 기법의 적은 출력 소요시간과 높은 출력 정밀도 그리고 간단한 후처리 공정을 이용하여 [4] 다재료 3차원 프린팅의 연구가 이루어졌다 [5][6][7] . …”