Dielectric and optical anisotropy enhanced by 1,3-dioxolane terminal substitution on tolane-liquid crystals

Abstract

Four series of 1,3-dioxolane-terminated liquid crystals were prepared via multi-step reactions based on 4-alkylcyclohexanecarboxylic acids. Their structures were confirmed by infrared spectrometry (IR), nuclear magnetic resonance (NMR) and mass spectrometry (MS). Their properties were measured by differential scanning calorimetry (DSC), polarising optical microscopy (POM), X-ray diffraction (XRD), Abbe refractometer and an electrical constants instrument. The results show that the positive dielectric anisotropy and birefringence of the tolane-liquid crystals are increased significantly by an introduction of 1,3-dioxolane as a terminal group. The application of the 1,3-dioxolane-terminated liquid crystals in the mixture was investigated and the results show that lower threshold voltage, wider nematic range and higher birefringence are obtained when compared to the mixture containing liquid crystals with buty-3-enyl as a terminal group. The lateral fluoro substituent, alkyne-bridge and 1,3-dioxolane terminal group enhance the stability of the nematic mesophase and the solubility of the corresponding compounds in the common host liquid crystal mixture. Meanwhile, DFT calculations of dipole moments and molecular polarizabilities were used to correlate the experimental findings.

Difluorovinyl Liquid Crystal Diluters Improve the Electro-Optical Properties of High-∆n Liquid Crystal Mixture for AR Displays

“…Equation (1) can be used to deduce the clearing points of the new LC mixtures, which were extrapolated by the host-guest method [ 37 ]. where x refers to the doping concentration of the diluter molecule, T c 2 is the extrapolation value of the clearing point, and T c H is the clearing point of the parent LC mixture.…”

Fluorination Improves the Electro-Optical Properties of Benzoxazole-Terminated Liquid Crystals in High Birefringence Liquid Crystal Mixtures: Experimental and Theoretical Investigations

“…Equations (2) and (3) can be used to deduce the clearing points ( T c ) and ∆ ε values of the new LC mixtures, which are extrapolated by the host–guest method [ 38 ]. where x refers to the doping concentration of LC compound, T c 2 and ∆ ε 2 are the extrapolation values of clearing point and dielectric anisotropy, and T c H and ∆ ε H are the extrapolation values of clearing point and dielectric anisotropy of the parent LC mixture.…”

Liquid-Crystal-on-Silicon for Augmented Reality Displays

“…Regarding electrical properties, the CMOS circuitry limits the operation voltage to <6 V for small-pitch panels. Such a low voltage can be achieved by increasing the dielectric anisotropy of LC materials, which could be obtained by applying lateral and terminal polar groups (such as F, CN, NCS, CF 3 or OCF 3 ) [37][38][39], polar CF 2 O bridges [40], and polar heterocycles [41,42]. However, these components often lead to a compromised nematic temperature range, lower solubility and higher viscosity γ 1 [38].…”

“…Such a low voltage can be achieved by increasing the dielectric anisotropy of LC materials, which could be obtained by applying lateral and terminal polar groups (such as F, CN, NCS, CF 3 or OCF 3 ) [37][38][39], polar CF 2 O bridges [40], and polar heterocycles [41,42]. However, these components often lead to a compromised nematic temperature range, lower solubility and higher viscosity γ 1 [38]. Breaking this trade-off, the difluoromethoxy bridge (-CF 2 O) [43] and isothiocyanato group (-NCS) [44,45] could improve ∆ε while retaining a reasonably low γ 1 .…”