Development of porous polyurethane/strontium‐substituted hydroxyapatite composites for bone regeneration

Abstract

Polyurethane (PU) has been widely used for the biomedical applications but its potential for bone regeneration is limited due to its lack of osteoconductive properties. Strontium substituted hydroxyapatite (SrHA) particles, on the other hand, are known to exhibit a positive effect on bone formation. Therefore, the aim of this study was to (i) develop porous polyurethane scaffolds containing strontium SrHA nanoparticles (PU/SrHA) and (ii) compare their in vitro biological performance for applications in bone regeneration to PU scaffolds. SrHA and HA was synthesized using a conventional wet-chemical neutralization reaction at temperatures of 25, 50, and 80°C. Chemical analysis was performed by inductively coupled plasma-optical emission spectrometry. Synthesizing temperatures at 25 and at 50°C were selected for the composite preparation (abbreviated as HA-25, SrHA-25, HA-50, and SrHA-50, respectively). PU was synthesized from isophorone diisocyanate, polytetramethylene ether glycol, and 1,4-butanediol. Composite scaffolds were prepared by addition of HA or SrHA nanoparticles into PU scaffolds during polymer preparation. The results showed that the Sr content in HA nanoparticles increased with increasing synthesis temperature. The addition of nanoparticles decreased the elongation-at-break and tensile strength, but significantly increased the surface wettability of the PU scaffolds. In vitro degradation tests demonstrated that release of cations was significantly higher from PU/SrHA-50 composite scaffolds. Cell culture tests indicated that PU composites containing either HA or SrHA nanoparticles increased proliferation of bone marrow stem cells as compared to plain PU scaffolds, whereas osteogenic differentiation was not affected by the incorporation of HA nanoparticles irrespective of the incorporation of Sr.

Ceramics and ceramic coatings in orthopaedics

“…Elutable silver [605,606] or antibiotics [607,608] have been incorporated to inhibit nosocomial infections. Composites of synthetic bio-erodible polymers [609] (e.g., polylactic acid, polyglycolic acid, and polylactic-co-glycolide), natural occurring polymers [610][611][612] (e.g., alginate, collagen, chitosan), or nonresorbing polyurethane [613] have been constructed principally to improve mechanical properties. Similarly, HAp has been admixed with bone cement and antibiotics for fixation and infection prevention, respectively [614].…”

Bioactive Polymeric Nanoparticles for Periodontal Therapy

“…There is a significant scope in the application of nanomaterials to positively interfere in periodontal disease development and its progression [3,7,8]. A novel type of polymeric nanoparticles (NPs) composed by 2-hydroxyethyl methacrylate, ethylene glycol dimethacrylate and methacrylic acid connected covalently, have been produced.…”

Biomimetic Coating of Hydroxyapatite on Glycerol Phosphate-Conjugated Polyurethane via Mineralization

“… 6 − 8 However, the only limitation of PU for use in permanent implants is its low biocompatibility, reflecting its hydrophobic polymer chain. 9 To enhance the biological property of PU, several bioactive coatings were deposited using hydrogels or bioceramics. 10 , 11 …”