Development and Demonstration of Membrane to Control Potential Pathogen (Legionella sp.) Associated With Cooling Towers

Abstract

The presence of pathogens in industrial cooling towers has been identified as one of the causes of legionellosis, but the tangible hazard has been unrecognized. The major function of a cooling tower in the industries is to transfer heat into the environment through evaporation which leads to an unusual increment in the conductivity of water. Conductivity indicates dissolved solids of water which further facilitate the occurrence of corrosion within the cooling tower systems that may hamper the overall functioning of the cooling tower. The lab-scale study was conducted to developed and demonstrated an efficient membrane to control potential pathogen (Legionella sp.) associated with cooling tower water. In the present study, cooling tower water from various locations was collected and examined for physicochemical parameters (pH, conductivity, salinity, sulfate, and APS reductase) and microbial load. The phylogenetic analysis of the potential sample (with a maximum load of bacterial counts, P1) confirms the presence of Legionella sp., Pseudomonas sp., and Flavobacterium sp. In the present investigation, a unique membrane was developed to regulate the growth of pathogenic contaminants along with sulfate, alkalinity in the cooling tower water. The membrane was capable of reducing conductivity from 6.03 to 4.5 mS/cm and total microbial load reduced by 40% by passing through the liquid. The developed membrane was characterized through FTIR that indicated the presence of carbonyl, C-CH 3 and CO -C group whereas, thermal properties of the membrane was determined through TGA. Thus the developed membrane may be used for environmental monitoring and maintenance, including anti-scale treatment, and physical, chemical, and microbiological control, ensure the good performance of reducing the Legionella sp. risk for public health in cooling tower stations.

Digital transformation of legionella-safe cooling towers: an ecosystem design approach

“…Therefore, one of the most usual methods to control the bacteria is to keep cold water below 20°C and hot water stored at least at 60°C, combining with the use of biocides (Cloutman-Green et al , 2019; Iervolino et al , 2017). Additional methods include membranes for monitoring, maintenance and control in combination with sulfate and alkalinity (Sharma et al , 2020), and the continuous release of copper and silver ions into the water, showing positive results in the control of legionella at near 43°C (Cloutman-Green et al , 2019). However, “[i]t is important that the functioning of the system and associated equipment is considered as a whole and not in isolation (e.g.…”

Unveiling the potential of cellulose nanofibre based nitrogen fertilizer and its transformative effect on Vigna radiata (Mung Bean): nanofibre for sustainable agriculture

“…The shoot and root dry weights were recorded, and the roots-to-shoot ratio was determined. The leaves on the plant were counted; leaf area was calculated, and the number of primary branches was also counted for both the first and second harvesting stages ( Sharma et al., 2020 ). The soil pH and electrical conductivity were analysed using a pH metre and a conductivity metre, respectively.…”

Development of anti-foulant ultraviolet-assisted polyvinyl alcohol layer on the polysulfone-based nanohybrid membrane for industrial rubber wastewater decontamination

“…Recently, due to its ease of technical applicability, sophisticated separation performance, and compact design, membrane technology has been massively performed for wastewater treatment purposes worldwide (Vinardell et al, 2020;Zolghadr et al, 2021). Some benefits from the implementation of membrane technology in wastewater treatment have been demonstrated, including, clean process, low energy consumption, compact design, less chemical consumption, versatility to be combined with other processes, tunable removal properties, and sludge-free (Hu et al, 2020;Sharma et al, 2020;Vinardell et al, 2020;Younis et al, 2020;Álvarez Bayona et al, 2022). Despite its superiority, the membrane filtration process is prone to fouling issues (Zhao et al, 2020).…”