Determination of the mixing ratio of a flowing gas mixture with self-actuated microcantilevers

Abstract

Abstract. Microcantilevers offer a wide range of applications in sensor and measurement technology. In this work cantilever sensors are used as flow sensors. Most conventional flow sensors are often only calibrated for one type of gas and allow an analysis of gas mixtures only with increased effort. The sensor used here is a cantilever positioned vertically in the flow channel. It is possible to operate the sensor in dynamic and static mode. In the dynamic mode the cantilever is oscillating. Resonance frequency, resonance amplitude and phase are measured. In static mode, the bending of the cantilever is registered. The combination of the modes enables the different measured variables to be determined simultaneously. A flow influences the movement behaviour of the sensor, which allows the flow velocity to be deduced. In addition to determining the flow velocity, it is also possible to detect different types of gas. Each medium has certain properties (density and viscosity) which have different effects on the bending of the sensor. As a result, it is possible to measure the mixing ratio of a known binary gas mixture and their flow velocity simultaneously with a single sensor. In this paper this is investigated using the example of the air–carbon-dioxide mixture.

Investigations on tip-based large area nanofabrication and nanometrology using a planar nanopositioning machine (NFM-100)

“…After decades of research on microcantilevers and their potential applications, various principles have been established alongside AFM and SPL. Active cantilevers in particular, however, find a wide range of applications beyond the fields mentioned, such as in the areas of inertial, pressure, biological and chemical, as well as flow and acoustic sensor technology [41][42][43].…”

Neuromorphic acoustic sensing using an adaptive microelectromechanical cochlea with integrated feedback

“…The transducer is realized as a silicon beam with integrated piezo-resistive deflection sensing and integrated thermo-mechanical actuation (Methods). Such transducers have already been successfully applied in atomic force microscopy and scanning probe lithography 44 , as well as other sensing tasks like gas flow sensing and gas mixture analysis 45,46 . The integration of actuation and sensing into the beam has the advantage of being able to implement real-time feedback loops.…”

Impact of Fluid Flow on CMOS-MEMS Resonators Oriented to Gas Sensing

“…Micromechanical resonators are dramatically disturbed by a gas fluid flow induced at their surroundings, inducing an additional force on the mechanical structure that modifies its equilibrium displacement point, quality factor, etc. [ 23 ]. Achieving a practical application where the resonator works as a gravimetric sensor for VOCs requires a thoughtful understanding of the detailed interaction mechanisms between the fluid and the mechanical structure.…”