Determination of Local Heat Transfer Coefficient Based on Bulk Mean Temperature Using a Transient Liquid Crystals Technique

Abstract

Recent advances in thermochromic liquid crystal (TLC) thermography have improved its usefulness as a very effective temperature and heat transfer measurement technique. One of the approaches to determine the local heat transfer coefficient, known as the transient technique, is to monitor the temporal evolution of surface temperature in conjunction with the solution of a transient heat conduction model penetrating to the wall substrate. The local heat transfer coefficient resulted from such a transient test, by nature, has its reference temperature based on the inlet temperature of the test rig, rather than the local bulk mean temperature. The latter during a transient test varies with both time and streamwise location. The heat transfer coefficient based on the inlet temperature presents difficulty in data interpretation in designs of turbine cooling passages, particularly for passages with large length-to-diameter ratios. This study evaluates four different approaches and theoretical background associated for determining the local bulk mean temperature and the sensible local heat transfer coefficient. Using a test model of an internal cooling passage with delta-wing shaped vortex generators mounted on one of the passage walls, the magnitudes of the sensible heat transfer coefficient resulted from various approaches vary as much as 40%. Validated with the experimental data, two of the four methods yield superb data accuracy. Nevertheless, one of them stands out as the best choice, as it requires much less post-processing time and implementation effort.

Implementation of Liquid Crystal Thermography to Determine Wall Temperatures and Heat Transfer Coefficients in a Tube-in-tube Heat Exchanger

“…It has been used to obtain wall temperature profiles by applying it to heat transfer surfaces [17][18][19] or for determining local fluid temperatures by suspending TLC-treated particles within fluids [20][21][22].…”

Experimental Investigation of Innovative Internal Trailing Edge Cooling Configurations with Pentagonal Arrangement and Elliptic Pin Fin

“…Afterwards, [12,13] used the naphthalene sublimation method, based on heat-mass transfer analogy, to investigate the separate contribution of endwall and pin fin. The work in [5,6] performed detailed heat transfer measurements on the endwall surface of pedestals array with TLC transient technique.…”

Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortex Generators

“…It is interesting to compare with other researchers' results. Chyu et al (1997) studied the heat transfer enhancement around the delta winglet I U VG pair in an array. Their operating conditions (versus our operating conditions) are H/2A = 0.4 (0.12), Pi/H = 5 (10), MB = 2 (I), oval cross-section (square cross-section), and Re = 3 x 104 (1.2 x 104).…”

“…Recently, Elckad and Han (1997) reported Nusselt number distributions for a two-pass square channel with one ribbed wall using a transient liquid crystal technique. Chyu et al (1997) investigated heat transfer enhancement of ducts with multiple delta wing pair arrays by using a transient liquid crystal technique as well. In general, the transient liquid crystal technique is able to provide detailed local heat transfer distribution maps; nevertheless, its applications to study the heat augmentation associated with longitudinal vortex generators are still limited.…”