Detection of explosives by differential hyperspectral imaging

Abstract

Abstract. Our team has pioneered an explosives detection technique based on hyperspectral imaging of surfaces. Briefly, differential reflectometry (DR) shines ultraviolet (UV) and blue light on two close-by areas on a surface (for example, a piece of luggage on a moving conveyer belt). Upon reflection, the light is collected with a spectrometer combined with a charge coupled device (CCD) camera. A computer processes the data and produces in turn differential reflection spectra taken from these two adjacent areas on the surface. This differential technique is highly sensitive and provides spectroscopic data of materials, particularly of explosives. As an example, 2,4,6-trinitrotoluene displays strong and distinct features in differential reflectograms near 420 and 250 nm, that is, in the near-UV region. Similar, but distinctly different features are observed for other explosives. Finally, a custom algorithm classifies the collected spectral data and outputs an acoustic signal if a threat is detected. This paper presents the complete DR hyperspectral imager which we have designed and built from the hardware to the software, complete with an analysis of the device specifications. © The Authors.Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Advances in explosives analysis—part II: photon and neutron methods

“…Because the underlying physics relies on electronic absorptions that are typically broad and indistinct, selectivity is not expected to be nearly as high as for vibrational spectroscopy. Despite these difficulties, differential hyperspectral imaging [81,82] under active illumination in the 200-500 nm range has been used to achieve a limit of detection (LOD) of 100 ng for TNT with selective ROCs [83].…”

Identification of Typical Solid Hazardous Chemicals Based on Hyperspectral Imaging

“…Hyperspectral imaging has a wide range of applications, can perform fine classification and identification of material properties, and has the advantages of long-distance, non-contact, and non-destructive detection. However, in the current literature, there are few research results on the identification and detection of hazardous chemicals using a hyperspectral imaging technique [28][29][30][31]. In this study, we attempted to take advantage of these two disciplines to apply refined classification with a high spectral resolution to the identification of hazardous chemicals, so as to establish a certain theoretical framework and provide a new method for long-distance and non-contact detection of hazardous chemicals.…”

A tiny VIS-NIR snapshot multispectral camera

“…Thanks to this they can uncover information hidden inside the spectral response characteristics of a scene. This information has a huge potential to add value to a diverse range of real-life applications including remote sensing [1], food science [2], medical imaging [3], optical sorting [4], precision agriculture [5], security [6], forensics [7], colorimetry [8], ... Clearly, good spectral imaging performance will be needed to exploit this potential. However, a consideration of the diverse requirements introduced by moving the spectral cameras out of the lab and into the unique environments linked to these applications will also be essential: a spectral camera for the optical sorting application domain [4] will typically exhibit a need for extremely high frame rates to enable high scanning speeds, a need for high spectral resolution to maximize flexibility and sorting accuracy, and a need for high spatial resolution to track fine details.…”