Design, path planning improvement and test of a portable massage robot on human back

Abstract

A massage robot that helps to improve the quality of human life has attracted more interests of researchers and consumers. A portable back massage robot that is compact and space-saving was designed to be used on human back instead of a traditional large-scale structure robot. To design the massage robot, the models of electric circuit, magnetic circuit and mechanics were analyzed to achieve optimal massage force. Parameters of the massage actuator are determined based on the influence analysis of the coil current, the coil turns and the distance between the moving core and the yoke on the electromagnetic force. The massage coverage of human back, which is used to calculate the massage effect, could be improved by an excellent path planning algorithm. This article proposed an efficient full covered path planning algorithm for the designed massage robot, and the relevant algorithm models were established. Simulation results show that the coil current is much more sensitive to electromagnetic force of the moving core compared to the other two factors, and the presented path planning algorithm completes full coverage of the massage robot on the back area. The experimental platform of the massage robot was built, and the influence of the input signal duty cycle, the input signal voltage and the hardness of the massage object on the massage effect was discussed by testing the values of acceleration. The tested results show that the massage effect is best when the duty cycle is in the range of 1/8–1/2. Meanwhile, the hardness of massage parts affects the massage intensity. The consistency between the tested results of path planning and simulation verifies the feasibility of the simulation procedure and indicates that the massage robot can attain the desired massage performance and realize the planned paths.

Autonomous land vehicle path planning algorithm based on improved heuristic function of A-Star

“…The ALV needs to bypass obstacles many times to reach the given target point. The given start position coordinates are (24,17) and the target position coordinates are (4,16).…”

“…Chen et al 15 defined the valuation function as an exponential decay method to reduce redundant expansion. Wang et al 16 proposed an efficient full area coverage path planning algorithm based on grid mapping. Zhang et al 17 considered the actual application scenarios of unmanned boats and improved the evaluation function by adding the corner loss term, so that the final path has the smallest corner and reduces the loss on the path.…”

A Comprehensive Review of Coverage Path Planning in Robotics Using Classical and Heuristic Algorithms

“…Barrientos et al [160] suggested a waveform planner based on the BFS technique that can be applied over the grid-based workspace to generate the coverage path with a minimum number of turns. Wang et al [161] proposed a CPP method to reduce the uncovered area by employing the BFS algorithm. However, this approach causes an uncovered edge, and the robot may fail to operate in the corner.…”

Toward automatic robotic massage based on interactive trajectory planning and control

“…Several robotic systems have been developed to perform massage tasks, involving physical interaction between the robotic end-effector and the human body. Research conducted by Wang et al [28] designed a wheeled robot to move on the human body, utilizing an electromagnetic drive mechanism to achieve tapping motion. However, this method lacks motion stability and is susceptible to disturbances from the wheels.…”