Design and Implementation of a Wireless Medical Robot for Communication Within Hazardous Environments

Abstract

The huge spreading of COVID-19 viral outbreak to several countries motivates many of the research institutions everywhere in numerous disciplines to try decreasing the spread rate of this pandemic. Among these researches are the robotics with different payloads and sensory devices with wireless communications to remotely track patients’ diagnosis and their treatment. That is, it reduces direct contact between the patients and the medical team members. Thus, this paper is devoted to design and implement a prototype of wireless medical robot (MR) that can communicate between patients and medical consultants. The prototype includes the modelling of a four-wheeled MR using systems' identification methodology, from which the model is utilized in control design and analysis. The required controller is designed using the proportional-integral-derivative (PID) and Fuzzy logic (FLC) techniques. The MR is equipped onboard with some medical sensors and a camera to acquire vital signs and physical parameters of patients. The MR model is obtained via an experimental test with input/output signals in open-loop configuration as single–input–single–output from which the estimation and validation results demonstrate that the identified model possess about 89% of the output variation/dynamics. This model is used for controllers' design with PID and FLC, the response of which is good for heading angle tracking. Concerning the medical measurements, more than two thousand real recorded Photo-plethysmography (PPG) signals and Blood Pressure (BP) are used to find the appropriate BP estimation model. Towards this objective, some experiments are designed and conducted to measure the PPG signal. Finally, the BP is estimated with mean absolute error of about 4.7 mmHg in systolic and 4.8 mmHg in diastolic using Artificial Neural Network.

Improved Path Tracking Control in Mobile Robots Using a Hybrid FOPID Controller with Backstepping Technique: An Experimental Study

“…Among these, the Caputo method is the most widely used definition in engineering applications, and is represented by Eq. (2).…”

“…Currently, the developments in science and technology enable the appearance of commercial robots in the industrial field, where the requirement for a programmable vehicle that can move in three-dimensional workspace for tasks execution is getting increasing every day. Wheeled mobile robots have become increasingly important in a range of industrial applications [1][2][3][4][5][6]. In order to achieve such challenging demands, a high efficiency control methodology with fast time response for tracking both speed and orientation angle during the task's execution is required, while mobile robot interactions and their nonlinear structure make it challenging to implement control algorithms.…”

An Analysis of Sliding Mode Speed Controller for a Differential Drive Wheel Mobile Robot

“…Due to their simplicity, affordability, and versatility, WMRs are used in a wide variety of applications. This kind of robot can be utilized for medications and supplies delivery in hospitals and other healthcare facilities [1,2]. For manufacturing and logistics, WMRs can be used to deliver goods and material handling in indoor, urban and suburban areas [3][4][5].…”

Dielectric Elastomer-Driven Bionic Inchworm Soft Robot Realizes Forward and Backward Movement and Jump

“…Traditional robots tend to have stiff constructions, which are less safe and flexible [3][4][5]. On the other hand, the soft robot is a novel kind of robot composed of flexible or telescopic materials that has limitless degrees of freedom, remarkable agility, and inherent elasticity [6][7][8].…”