Design and Development of Wireless Fan Regulator using ZigBee Concept

Abstract

Due to rapid advances in wireless communication, wireless sensor networks, and information technologies; it is now possible to integrate a level of smartness in the home environment. This paper deals with the proposed design and its implementation required to Wireless Fan Regulator. The main use of this regulator is to adjust the rotation speed of the fan using remote consisting of Zigbee, potentiometer, microcontroller, LCD at the transmitting section (remote unit), and Zigbee, LCD and dimmer at the receiving section (Slave unit). The device would allow a person to control the rotating speed of a fan by simply pointing the remote potentiometer or by pressing any key on the remote. The key target is that it can easily work approximately at a distance of 60 meters from the fan. There are two endpoints used, one is to transmit and the other one is to receive. At the transmitting section Zigbee module is used to transmit the data and at the receiving section also Zigbee module is used to receive the data and it will also display the same on LCD. The requirements of the power consumption are less in Zigbee communication i.e this communication is used in this paper. Since the transceivers power consumption is very less in Zigbee protocol communication so it's pretty obvious that Zigbee Protocol communication is the prime choice for smart object development.

Water Quality Monitoring and Management of Building Water Tank Using Industrial Internet of Things

“…In this study, the significance of implementing Zigbee protocol for wireless monitoring of irrigation and Zigbee consumes low power during the transmission of the data through wireless mode [20,21]. A wireless surveillance communication model is proposed for monitoring the water distribution and this communication model utilizes flat earth double-ray model for validation [22]. A Smart Coast Multi-Sensor System is developed for monitoring the quality of water by measuring the temperature, level of phosphate, and the amount of oxygen dissolved, conductivity, pH, turbidity, and water levels [23].…”

Hybrid Architectural Network Implementation to Realize a Fire Evacuation Path with 2.4 GHz Zigbee and LoRa

“…Moreover, it is recommended to utilize a low power consumption-based wireless communication system for implementing real-time monitoring. At present, Zigbee [16] and LoRa communication provide reliable data transmission with low power consumption. LoRa technology is one of the LPWAN emerging technologies that meets the requirements of IoT in terms of low power consumption and long-range transmission for real-time monitoring [17].…”

Design of dual-band bandpass filter based on multistub resonator structure at frequency of 900 MHz and 1.85 GHz

“…In wireless mobile telecommunication system, Band pass filter (BPF) is an essential part component, the increase demand of wireless based communication application needs RF transceiver which operate at different frequencies, so that the users can access various service by single multimode handset or terminal [1][2][3]. Filter has function to reduce noise, to prevent signal change due to intermodulation [4], to prevent aliansing and to reduce signal interference [5].…”