Design and Analysis of the Voltage Controller for the Non Isolated Boost DC-DC Convertor

Abstract

In this paper, a controller has been presented by the root locus method based on the state space average model of the boost switching regulator with all of the converter’s parameters and uncertainties. In this model, the load current is unknown and the inductor, capacitor, diode and active switch are non ideal and have an on-state resistance. Furthermore, an on-state voltage drop has been considered for diode and active switch. By neglecting the load current and assuming the ideal elements the simplified model of the regulator has been caddied out. By these complete and simplified models, a step by step method has been proposed to design a single input single output (SISO), second order controller based on roots locus method. In this regard the controller's electronic circuit has been introduced by operational amplifiers. At the end, by simulation of the complete closed-loop system in MATLAB Simulink environment and comparing its results by the results of the regulator and controller circuits in PLECS, the accuracy of the designed controller performance has been shown.

Design of Zero Voltage Switching Boost DC-DC Converter Using Bond Graph Model

“…There are some models such as switched state space model, state space average model, circuit averaging model, generalized average model and sampled data models [3] for power electronic converters. State space model of non isolated DC-DC boost converter has been developed in literature [4]. The converter switches, inductors and capacitors are to be modelled based on the simulation type chosen.…”