Data on fuel cell performance of Nafion® based hybrid composite membrane containing GO and dihydrogen phosphate functionalized ionic liquid at 70 °C under anhydrous condition

Maiti, Jatindranath; Kakati, Nitul; Woo, Sung Pil; Yoon, Young Soo

doi:10.1016/j.dib.2017.12.037

“…Composition of second cathode is Carbon paper Ballard, Platinum-Carbon 20%, Nafion solution (20% weight), 80 ml Isopropyl alcohol, and 20 ml double distillation water with 0.39 mg.cm -2 loading of Platinum. (1)(2), the values are: power density, current density and resistance.…”

Section: -1-standard Test Of Nafion 112 Membrane 2-1-1-experimental mentioning

confidence: 99%

“…The experimentally resulted data shows the performance of a PEMFC at several percent of membrane compression, different applied voltages, different pressure of H2/O2 gas, and various humidity conditions of cathode and air, which can be used to study behavior of PEMFC that is necessary to research and development of fuel cells. In other words, the dataset help researchers and specialists who investigate and work on PEM fuel cells [1].…”

Section: -Data Introductionmentioning

confidence: 99%

Dataset of Standard Tests of Nafion 112 Membrane and Membrane Electrode Assembly (MEA) Activation Tests of Proton Exchange Membrane (PEM) Fuel Cell

Hamidi¹,

Haghighi²,

Askari³

2020

Preprint

View full text Add to dashboard Cite

Reported data in this paper are about Nafion 112 membrane standard tests and MEA activation tests of PEM fuel cell in various operation condition. Dataset include two general electrochemical analysis method, Polarization and Impedance curves. In this dataset, effect of different pressure of H2/O2 gas, different voltages and various humidity conditions in several steps are considered. Details of experimental methods has been explained in this paper. Behavior of PEM fuel cell during distinct operation condition tests, activation procedure and different operation condition before and after activation analysis can be concluded from data. In Polarization curves, voltage and power density change as a function of flows of H2/O2 and relative humidity. Resistance of the used equivalent circuit of fuel cell can be calculated from Impedance data. Thus, experimental response of the cell is obvious in the presented data, which is useful in depth analysis, simulation and material performance investigation in PEM fuel cell researches.<br>

show abstract

“…The reported dataset is available on ECSIM organization GitHub account [5]. This work is licensed under a Creative Commons (1)(2), the values are: power density, current density and resistance.…”

Section: -Data Introductionmentioning

confidence: 99%

Dataset of Standard Tests of Nafion 112 Membrane and Membrane Electrode Assembly (MEA) Activation Tests of Proton Exchange Membrane (PEM) Fuel Cell

Hamidi¹,

Haghighi²,

Askari³

2020

Preprint

3

0

View full text Add to dashboard Cite

Reported data in this paper are about Nafion 112 membrane standard tests and MEA activation tests of PEM fuel cell in various operation condition. Dataset include two general electrochemical analysis method, Polarization and Impedance curves. In this dataset, effect of different pressure of H2/O2 gas, different voltages and various humidity conditions in several steps are considered. Details of experimental methods has been explained in this paper. Behavior of PEM fuel cell during distinct operation condition tests, activation procedure and different operation condition before and after activation analysis can be concluded from data. In Polarization curves, voltage and power density change as a function of flows of H2/O2 and relative humidity. Resistance of the used equivalent circuit of fuel cell can be calculated from Impedance data. Thus, experimental response of the cell is obvious in the presented data, which is useful in depth analysis, simulation and material performance investigation in PEM fuel cell researches.<br>

show abstract

Magnetic, Structural and Spectroscopic Properties of Iron(II)-Octacyanoniobate(IV) Crystalline Film Obtained by Ion-Exchange Synthesis

Sas

¹

,

Pinkowicz

²

,

Perzanowski

³

et al. 2020

View full text Add to dashboard Cite

Over recent years, investigations of coordination polymer thin films have been initiated due to their unique properties, which are expected to be strongly enhanced in the thin film form. In this work, a crystalline [FeII(H2O)2]2[NbIV(CN)8]∙4H2O (1) film on a transparent Nafion membrane was obtained, for the first time, via ion-exchange synthesis. The proper film formation and its composition was confirmed with the use of energy dispersive X-ray spectroscopy and infrared spectroscopy, as well as in situ Ultraviolet-Visible (UV-Vis) spectroscopy. The obtained film were also characterized by scanning electron microscopy, X-ray diffraction, and magnetic measurements. The [FeII(H2O)2]2[NbIV(CN)8]∙4H2O film shows a sharp phase transition to a long-range magnetically ordered state at Tc = 40 K. The 1 film is a soft ferromagnet with the coercive field Hc = 1.2 kOe. Compared to the bulk counterpart, a decrease in critical temperature and a significant increase in the coercive field were observed in the films indicating a distinct size effect. The decrease in Tc could also have been related to the possible partial oxidation of FeII ions to FeIII, which could be efficient, due to the large surface of the thin film sample.

show abstract

Data on fuel cell performance of Nafion® based hybrid composite membrane containing GO and dihydrogen phosphate functionalized ionic liquid at 70 °C under anhydrous condition

Cited by 7 publications

References 1 publication

Dataset of Standard Tests of Nafion 112 Membrane and Membrane Electrode Assembly (MEA) Activation Tests of Proton Exchange Membrane (PEM) Fuel Cell

Dataset of Standard Tests of Nafion 112 Membrane and Membrane Electrode Assembly (MEA) Activation Tests of Proton Exchange Membrane (PEM) Fuel Cell

Dataset of Standard Tests of Nafion 112 Membrane and Membrane Electrode Assembly (MEA) Activation Tests of Proton Exchange Membrane (PEM) Fuel Cell

Magnetic, Structural and Spectroscopic Properties of Iron(II)-Octacyanoniobate(IV) Crystalline Film Obtained by Ion-Exchange Synthesis

Contact Info

Product

Resources

About