Dark signal correction for a lukecold frame-transfer CCD

Abstract

Context. Astrophysical observations must be corrected for their imperfections of instrumental origin. When charge-coupled devices (CCDs) are used, their dark signal is one such hindrance. In their pristine state, most CCD pixels are cool, that is, they exhibit a low quasi-uniform dark current, which can be estimated and corrected for. In space, after having been hit by an energetic particle, pixels can turn hot, viz. they start delivering excessive, less predictable, dark current. The hot pixels therefore need to be flagged so that a subsequent analysis may ignore them. Aims. The image data of the PICARD-SODISM solar telescope require dark signal correction and hot pixel identification. Its E2V 42-80 CCD operates at −7.2• C and has a frame-transfer architecture. Both image and memory zones thus accumulate dark current during integration and readout time, respectively. These two components must be separated in order to estimate the dark signal for any given observation. This is the main purpose of the dark signal model presented in this paper. Methods. The dark signal time-series of every pixel was processed by the unbalanced Haar technique to timestamp when its dark signal changed significantly. In-between these instants, the two components were assumed to be constant, and a robust linear regression, with respect to integration time, provides first estimates and a quality coefficient. The latter serves to assign definitive estimates for this pixel and that period. Results. Our model is part of the SODISM Level 1 data production scheme. To confirm its reliability, we verified on dark frames that it leaves a negligible residual bias (5 e − ) and generates a small rms error (25 e − rms). We also examined the distribution of the image zone dark current. The cool pixel level is found to be 4.0 e − pxl −1 s −1 , in agreement with the predicted value. The emergence rate of hot pixels was investigated as well. It yields a threshold criterion at 50 e − pxl −1 s −1 . The growth rate is found to be on average ∼500 new hot pixels per day, that is, 4.2% of the image zone area per year. Conclusions. A new method for dark signal correction of a frame-transfer CCD operating near −10• C is described and applied. It allows making recommendations about the implementation and scientific usage of such CCDs. Moreover, aspects of the method (adaptation of the unbalanced Haar technique, dedicated robust linear regression) have a generic interest.

Ground-based measurements of the solar diameter during the rising phase of solar cycle 24

“…The image data of the SODISM II solar telescope require dark-signal corrections (Hochedez et al 2014). SODISM II dark-current images have been performed every day and with an exposure time of 1.4 s. All images have been corrected for dark-current.…”

Development of a VNIR/SWIR Multispectral Imaging System for Vegetation Monitoring with Unmanned Aerial Vehicles

“…Self-heating is a determining factor for the magnitude of the various temperature-dependent sources of interference in image sensors, which in turn degrade the image quality [45,51,52]. In principle, it is possible to read the temperature data of both the image sensor (CCD) and the electronics (PCB) of the OWL 640 mini camera module.…”

The PICARD Scientific Mission: status of the program

“…The Solar radius determination [10][11][12][13][14][15][16][17][18][19] On 5 to 6 June, 2012 the transit of Venus provided a rare opportunity to determine the radius of the Sun using solar imagers observing a well-defined object, namely the planet and its atmosphere, occulting partially the Sun. A method to determine the solar radius has been developed; it is based on the estimation of the spectral solar radiance decrease in a region around the contact between the planet and the Sun at the beginning of the ingress and at the end of the egress.…”