Crosstalk Reduction for Superconducting Microwave Resonator Arrays

Abstract

Large-scale arrays of Microwave Kinetic Inductance Detectors (MKIDs) are attractive candidates for use in imaging instruments for next generation submillimeter-wave telescopes such as CCAT. We have designed and fabricated tightly packed ~250-pixel MKID arrays using lumped-element resonators etched from a thin layer of superconducting TiNx deposited on a silicon substrate. The high pixel packing density in our initial design resulted in large microwave crosstalk due to electromagnetic coupling between the resonators. Our second design eliminates this problem by adding a grounding shield and using a double-wound geometry for the meander inductor to allow conductors with opposite polarity to be in close proximity. In addition, the resonator frequencies are distributed in a checkerboard pattern across the array. We present details for the two resonator and array designs and describe a circuit model for the full array that predicts the distribution of resonator frequencies and the crosstalk level. We also show results from a new experimental technique that conveniently measures crosstalk without the need for an optical setup. Our results reveal an improvement in crosstalk from 57% in the initial design down to \leq 2% in the second design. The general procedure and design guidelines in this work are applicable to future large arrays employing microwave resonators.Comment: Paper published in IEEE Transactions on Microwave Theory and Technique

A superconducting focal plane array for ultraviolet, optical, and near-infrared astrophysics

“…To avoid crosstalk between pixels the inductors are made with a double meander design that allows the electric field from the charge in each meander leg to be precisely cancelled by the adjacent leg [21]. The array is designed so that resonators close together in resonant frequency are physically far apart.…”

Design considerations for a background limited 350 micron pixel array using lumped element superconducting microresonators

“…This high pixel packing density can result in electronic crosstalk between pixels arising from the electromagnetic coupling between resonators. 8 To reduce the crosstalk, the meander inductor uses the double wound geometry shown in Fig. 1 where conductors of opposite polarity are in close proximity.…”

Design of an Integrated Filterbank for DESHIMA: On-Chip Submillimeter Imaging Spectrograph Based on Superconducting Resonators

“…Similar conclusions can be made with other sources of errors, such as the metal thickness variation: Random errors are much more harmful than a common drift. On top of this, there can be inter-filter crosstalk [11], which could further randomize the filter positions. How small the scatter can be made is an issue to be addressed both by simulation and experiment.…”