Core Stress Analysis of Amorphous Alloy Transformer for Rail Transit under Different Working Conditions

Abstract

The rail transit system is a large electric vehicle system that is strongly dependent on the energy technologies of the power system. The use of new energy-saving amorphous alloy transformers can not only reduce the loss of rail transit power, but also help alleviate the power shortage situation and electromagnetic emissions. The application of the transformer in the field of rail transit is limited by the problem that amorphous alloy is prone to debris. this paper studied the stress conditions of amorphous alloy transformer cores under different working conditions and determined that the location where the core is prone to fragmentation, which is the key problem of smoothly integrating amorphous alloy distribution transformers on rail transit power supply systems. In this study, we investigate the changes in the electromagnetic field and stress of the amorphous alloy transformer core under different operating conditions. The finite element model of an amorphous alloy transformer is established and verified. The simulation results of the magnetic field and stress of the core under different working conditions are given. The no-load current and no-load loss are simulated and compared with the actual experimental data to verify practicability of amorphous alloy transformers. The biggest influence on the iron core is the overload state and the maximum value is higher than the core stress during short circuit. The core strain caused by the side-phase short circuit is larger than the middle-phase short circuit.

Measurement Analysis and Improvement of Vibroacoustic Characteristics of Amorphous Alloy Transformer

“…However, to meet more stringent noise emission standards for new transformer products, it is necessary to put forward improvement measures in the design stage [27]. Thus, to reduce the manufacturing cost and supply guidance of low-noise transformer design, it is essential to accurately analyze vibration and noise at different frequencies of an amorphous alloy transformer under different working conditions [28,29]. Meanwhile, it is crucial to investigate the noise and vibration influencing factors for better control.…”