Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics

Abstract

Power electronics are increasingly important in new generation vehicles as critical safety mechanical subsystems are being replaced with more electronic components. Hence, it is vital that the health of these power electronic components is monitored for safety and reliability on a platform. The aim of this paper is to develop a prognostic approach for predicting the remaining useful life of power electronic components. The developed algorithms must also be embeddable and computationally efficient to support on-board real-time decision making. Current state-of-the-art prognostic algorithms, notably those based on Markov models, are computationally intensive and not applicable to real-time embedded applications. In this paper, an isolated-gate bipolar transistor (IGBT) is used as a case study for prognostic development. The proposed approach is developed by analyzing failure mechanisms and statistics of IGBT degradation data obtained from an accelerated aging experiment. The approach explores various probability distributions for modeling discrete degradation profiles of the IGBT component. This allows the stochastic degradation model to be efficiently simulated, in this particular example ∼1000 times more efficiently than Markov approaches. Index Terms-Isolated-gate bipolar transistor (IGBT), Monte-Carlo simulation (MCS), power electronics, prognostics, remaining useful life (RUL).

Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs

“…However, the temperature dependence is potentially nonlinear and current-dependent, therefore its use in online monitoring requires current measurement in order to decouple the load dependency from thermal effects. is also dependent on the state-of-health of device-to-packaging interconnects and indeed the collector-emitter voltage in IGBTs has also been proposed as a condition monitoring indicator of wirebond lift-off and solder fatigue [33].…”

Continuous maintenance and the future – Foundations and technological challenges

“…The LRU and the system levels often degrade in service through a combination of component/board-level failures with the 'no fault found' type problems. Alghassi et al [2] identify thermo-mechanical stress as a major factor for connector failures for power electronics, such as isolated-gate bipolar transistor (IGBT). Fig.…”

Analysis of the Robustness of Transformerless PV Inverter Topologies to the Choice of Power Devices

“…This is the case in [30], where MC allows the lifetime of power electronic components in power converters to be estimated. In [31] a MC based method is applied to the bond wire lifetime prediction in IGBT modules for PV inverters.…”