Computational simulation and modelling of uranium extraction using tributylphosphate through membrane extractor

Abstract

Non-disperse solvent extraction is an effective technique for the extraction of metal ions from aqueous solution. In this study, uranium extraction using n-dodecane solvent containing tributylphosphate extractant in a membrane contactor was investigated. A 2D mathematical model was developed for the fluid flow and mass transfer in the hollow fibre membrane extractor. The equations of the created model were solved using the finite element method. The uranium concentration distribution in the extractor at different extractant concentrations as well as feed acidity was studied. The results showed that there is reasonable good agreement between experimental uranium extraction and modelling outputs at different extractant concentrations. Increasing extractant concentration from 5 to 30% led to the enhancement of uranium extraction from 2.60 to 34.13%. Also, there was an increase in the uranium extraction with increasing feed acidity in the range of 1–3 M. Furthermore, based on the radial uranium concentration distribution, it was found that the main mass transfer resistance in the system was microporous membrane section. Finally, it was obtained that the uranium extraction efficiency could be improved significantly by increasing porosity-to-tortuosity ratio. It was concluded that the membrane specification plays the most important role as the dominant mass transfer resistant was in the membrane subdomain.

Indole-functionalized cross-linked chitosan for effective uptake of uranium(vi) from aqueous solution

“…4,5 Consequently, the pollution by U(VI) is one of the most pressing concerns regarding nuclear power at present. Various remedia-tion strategies have been proposed and constructed to handle U(VI) contaminants including precipitation, 6,7 photocatalytic reduction, [8][9][10] membrane separation, [11][12][13] ion exchange 14,15 and adsorption. [16][17][18][19][20] Unfortunately, the precipitation technique is limited by the vast amount of secondary waste.…”